Prediction Model of Aluminized Coating Thicknesses Based on Monte Carlo Simulation by X-ray Fluorescence

Abstract

An aluminized coating can improve the high-temperature oxidation resistance of turbine blades, but the inter-diffusion of elements renders the coating’s thickness difficult to achieve in non-destructive testing. As a typical method for coating thickness inspection, X-ray fluorescence mainly includes the fundamental parameter method and the empirical coefficient method. The fundamental parameter method has low accuracy for such complex coatings, while it is difficult to provide sufficient reference samples for the empirical coefficient method. To achieve accurate non-destructive testing of aluminized coating thickness, we analyzed the coating system of aluminized blades, simulated the spectra of reference samples using the open-source software XMI-MSIM, established the mapping between elemental spectral intensity and coating thickness based on partial least squares and back-propagation neural networks, and validated the model with actual samples. The experimental results show that the model’s prediction error based on the back-propagation neural network is 4.45% for the Al-rich layer and 16.89% for the Al-poor layer. Therefore, the model is more suitable for predicting aluminized coating thickness. Furthermore, the Monte Carlo simulation method can provide a new way of thinking for materials that have difficulty in fabricating reference samples.

Simulation Models in a Fluidity Test of the Al-Si Alloy

“…The Monte Carlo simulation uses a statistical method to simulate the process [28]. The Monte Carlo method or probability simulation is a way of statistically evaluating mathematical functions using random samples.…”

Advances in Measurement and Data Analysis of Surfaces with Functionalized Coatings

“…There are many aspects wherein the effect of surface topography (ST) on functional properties can be large. Generally, the effect of ST on contact, e.g., stiffness [1], conductivity [2], oxidation resistance [3], adhesive [4], improvement with friction [5], lubrication [6], wear [7], corrosion [8], and fatigue [9] properties, is very high. Much relevant information can be received from the analysis of ST.…”