PP and PS seismic response from fractured tight gas reservoirs: a case study

Abstract

In this paper, we present an example of using PP and PS converted-wave data recorded by digital MEMS (micro-eletro-mechanical-system) to evaluate a fractured tight gas reservoir from the Xinchang gas field in Sichuan China. For this, we analyze the variations in converted shear-wave splitting, Vp/Vs ratio and PP and PS impedance, as well as other attributes based on absorption and velocity dispersion. The reservoir formation is tight sandstone, buried at a depth of about 5000m, and the converted-wave data reveal significant shear-wave splitting over the reservoir formation. We utilize a rotation technique to extract the shear-wave polarization and time delay from the data, and a small-window correlation method to build time-delay spectra that allow the generation of a time-delay section. At the reservoir formation, the shear-wave time-delay is measured at 20ms, about 15% shear-wave anisotropy, correlating with the known gas reservoirs. Furthermore, the splitting anomalies are consistent with the characteristics of other attributes such as Vp/Vs ratio and P-and S-wave acoustic and elastic impedance. The P-wave shows consistent low impedance over the reservoir formation, whilst the S-wave impedance shows relatively high impedance. The calculated gas indicator based on absorption and velocity dispersion yields a high correlation with the gas bearing formations.This confirms the benefit of multicomponent seismic data from digital MEMS sensors.