Polyester Encapsulation Using Ultrasonic Welding

AbstractHistoric documents are frequently protected by placing them in a sealed polyethylene-terephthalate (PET) envelope. Although the paper is mechanically stabilized, the PET film may limit transmission of moisture or acidic degradation by-products of the paper. This creates a microenvironment for the encapsulated document. The permeation of water and acetic acid vapor through the PET film was measured to understand the microenvironment within an encapsulated enclosure. For encapsulation with a 102 μm (4 mil) PET film, the water vapor mass flux through the encapsulated film was measured. The water vapor was found to flow into or out of the PET film depending on the sample and environmental conditions. Because the encapsulated paper needed a longer time to dry than paper in open air, PET encapsulation provides a microenvironment that will buffer the encapsulated object from large swings in humidity. Acetic acid either did not diffuse through the PET, or it diffused at such a slow rate as to not be measured, due to the larger size of the acetic acid molecule than the water molecule. Keeping one edge of an encapsulation open allowed a drying rate that was four times faster than when all four sides were sealed. Because acetic acid vapor does not readily diffuse through the PET, these results reinforce the recommendations for deacidification and/or addition of buffering agents to the paper or enclosure. The results of this study point to a critical need for the investigation of new materials in conjunction with further evaluation of currently used materials.

show abstract

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.

Contact Info

hi@scite.ai

10624 S. Eastern Ave., Ste. A-614

Henderson, NV 89052, USA

Blog Terms and Conditions API Terms Privacy Policy Contact Cookie Preferences Do Not Sell or Share My Personal Information

Made with 💙 for researchers

Part of the Research Solutions Family.

Polyester Encapsulation Using Ultrasonic Welding

Abstract: Mylar polyester encapsulation is generally regarded as the simplest and most reversible method for reinforcement of brittle paper. The author describes the system developed over ten years ago for the Library of Congress, and current enhancements.

Cited by 4 publications

References 0 publications

The Permeability of PET by Formic and Acetic Acid Vapors

The Permeability of PET by Formic and Acetic Acid Vapors

The breathability of PET to water vapor: Thickness effects

Stewing in Its Own Juices? The Permeability of PET by Water and Acetic Acid

Contact Info

Product

Resources

About