Piston-electric propulsion system as reliable alternative for classic and nonconventional piston engine configurations

Abstract

Purpose The purpose of this paper is to define reliability requirements to be imposed on electric engines to assure similar or higher value of mean time between failures (MTBF) for mixed piston-electric propulsion configurations when compared to classic and unconventional piston engine configurations. Design/methodology/approach Reliability estimation was done using mathematical model of safety of light aircraft commercial operations. The model was developed on the basis of Federal Aviation Administration and National Transport Safety Board data. The analysis was conducted for numerous piston and electric configurations. It allowed comparison of selected solutions and definition of relation between electric engine MTBF and MTBF calculated for entire mixed piston-electric propulsion system. Findings It was found that, from reliability point of view, mixed piston-electric engine propulsion is attractive alternative for classic single- and twin-piston configuration. It would allow to at least doubling of MTBF for propulsion without increase of operational cost. Practical implications Rationale behind exploiting electric propulsion in aviation is provided. Relation between electric engine reliability and entire propulsion reliability was identified and defined. Minimum requirements concerning MTBF value for electric engine application in aviation was assessed. Conclusions from this study can be used for definition of requirements for new aircraft and by the regulatory authorities. Originality/value Originality consists in use of real accident statistics included in mathematical model of safety for assessment of MTBF for various classic and novel piston and piston-electric engine configurations of light aircraft. Output from the study can be exploited by the industry.

Multimodal 3D transport system implementation barriers in populated municipalities

“…Current share of air-taxi operation in total transportation effort results with significantly higher cost of operation (Piwek and Wisniowski, 2019). Electric propulsion is a promising solution as it can lead to significant simplification of system architecture as the electric engine is mechanically simpler, more flexible and usually does not require complex peripheral systems (Dziugiel, 2019). Simpler often means less expensive with regard to all its life cycle components and the same improved integration capabilities (Table 1).…”

Reliability modeling and analysis of cycloid gear grinding machines based on the bootstrap-bayes method

“…We find the cause of the failure and use the corresponding maintenance means to extend the trouble-free working time. MTBF is often selected to quantitatively describe the reliability level of the reliability of the cycloidal gear grinding machine (Dziugiel, B., 2020), and its formula is:…”