Optimization of bend stiffeners of a suspended inter-array power cable between two floating offshore wind turbines

Liu, D; Ahmad, I; Janocha, M J; Nystrøm, P; Ong, M C

doi:10.1088/1757-899x/1294/1/012018

Cited by 1 publication

(1 citation statement)

References 9 publications

(11 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…• Bend stiffeners are tapered polymer moldings that surround the cable at its attachment to the floating platform J-tube or at any attachment, such as clamps, that will cause large, localized bending. They are designed to gradually increase the cable bend stiffness where the cable is connected to the FOWT or other attached structure to avoid high localized bending [48]. • I-tubes or J-tubes, similar to a bend stiffener, control the cable's bending at the hang-off location.…”

Section: Dynamic Cable Types and Considerationsmentioning

confidence: 99%

The IEA Wind Task 49 Reference Floating Wind Array Design Basis

Hall,

Lozon,

Devoy McAuliffe

et al. 2024

View full text Add to dashboard Cite

This report provides a general design basis for the development of reference floating wind farm designs. These reference array designs will extend the scope of existing reference floating wind turbine designs to facilitate research on array-level floating wind technology challenges and innovations. The design basis promotes coordination and consistency in developing the reference array designs.International Energy Agency Wind Technology Collaboration Programme (IEA Wind) Task 49 on Integrated Design of Floating Wind Arrays is an international collaboration aiming to advance the development of large-scale floating wind farms by providing open-access resources to the research and development and planning communities. The work of Task 49 focuses on array-level challenges related to the colocation of many floating wind turbines; their layouts, mooring systems, and cabling systems; failure risks; logistical considerations; marine spatial planning needs; and future research needs and innovation directions. Task 49 is a 4-year effort that began in December 2021 and that includes representatives from project developers, technology providers, universities, consultancies, regulatory agencies, and research institutions from 12 countries. Its four work packages (WPs) have the following objectives:• WP1: Curate a set of site conditions representative of the global floating wind pipeline • WP2: Develop reference array designs for typical site conditions and technology types • WP3: Catalogue array-level failure risks, consequences, and mitigation strategies • WP4: Identify critical innovation opportunities and marine spatial planning requirements. This design basis report is the first major output from WP2, and it presents the approach for developing reference floating wind array designs. The contents of this design basis were developed from extensive discussions among WP2 participants, including five working groups focused on different areas during the first phase, and a group of three design teams that identified more specific challenges and approaches during the start of the design phase.Floating wind farm design involves many additional factors relative to individual floating wind turbines or fixed-bottom wind farms. Further, reference designs have different requirements than real projects. Therefore, this design basis contains important information and decisions to give definition to the reference floating wind array design effort. Reference Array Design ScopeThe main purpose of the reference designs is to support floating wind research and development at the array scale by serving as ready-made inputs for testing analysis methods, standardized designs upon which different innovations can be developed and evaluated, and baselines that different design variations can be compared against.The scope of the design effort was converged upon after extensive input and discussion. The reference designs will use existing reference floating wind turbine/platform designs and will focus on developing mooring systems, cabling, and array...

show abstract

Section: Dynamic Cable Types and Considerationsmentioning

confidence: 99%