Numerical investigations of the effect of rotating and non-rotating shaft on aerodynamic performance of small scale urban vertical axis wind turbines

Abstract

The shaft is a very important part of small scale vertical axis wind turbines (VAWTs) being used in urban environments. The shedding vortices will be formed as wind passes around the shaft, the shedding vortices released by the shaft have a negative effect on the aerodynamic performance of the blades passing the wake of the wind shaft, and this will lead to lower power output of the wind turbine. The objective of this study is to explore the differences of the effect of the rotating and non-rotating shafts of VAWTs on the aerodynamic performance of small scale urban VAWTs. In addition, the effect of surface roughness on the performance of the rotating and non-rotating shaft wind turbines is also investigated. The dynamic analysis of the VAWT is carried out by the method of Computational Fluid Dynamics. The aerodynamic loads in the study are obtained by solving the two-dimensional (2D) unsteady Navier-Stokes equations with the Transition SST turbulence model. The results are validated with experimental results. The results show that when the ratio of the shaft diameter to the wind turbine diameter (α) is 3.9%, the power coefficient (Cp) of the rotating shaft wind turbine is 2.2% higher than that of the non-rotating shaft wind turbine. Increasing the shaft diameter-based Reynolds number (Res) will increase the Cp of rotating and non-rotating shaft wind turbines, when Res is 2.6 × 104 and the Cp of the non-rotating shaft wind turbine is 5.7% higher than that of the rotating shaft wind turbine. The Cp of the non-rotating and rotating shaft wind turbines is reduced by 6.9% and 6.3%, respectively, by increasing the turbulence intensity from 4% to 16%. The optimal power output occurs under the condition of the non-rotating shaft wind turbine, and the relative surface roughness (ks/ds) is 0.005, where it is observed that Cp increased by 2.1% in comparison to that of the smooth shaft wind turbine.

Wind tunnel experimental study on static aerodynamic performance of SB-VAWT without intermediate support axes

“…The results show that the synthetic force generated by the blade on the main shaft during a cycle of operation is wavy and cannot be counteracted. Zhang Lidong et al (Zhang et al, 2018b) discovered that the shedding vortices released by the shaft have a negative effect on the aerodynamic performance of the blades passing the wake of the wind shaft, resulting in lower power output. Aya Aihara et al (Aihara et al, 2022a) used the Reynolds-averaged Navier-Stokes (RANS) model to determine that the support structure has a significant negative effect on the total tangential force of the wind turbine at high tip speed ratios (TSRs).…”