Numerical and Experimental Investigation of Three-Dimensional Flow in Combined Protective Canister Filters

Abstract

This work deals with the numerical and experimental investigation of flow in the protective filters which combine fibrous pleats and the absorbent cartridge. The flow through the complete 3D geometry of all parts of the filters, including complex geometry of the pleats, is numerically modeled using high-quality computational grids. The sorbent filling, textile dividers as well as the material of filtration pleats are modeled as the porous media with the coefficients of the quadratic Forchheimer equation derived from the experiments in the laboratory located at the SIGMA Research and Development Institute. A comprehensive CFD analysis has been carried out using the ANSYS CFX package with the SST turbulence model, which combines advantages of both the high- and the low-Reynolds number turbulence models. The fully parametric description of the pleats enables the generation of high-quality structured computational grids for a wide range of pleat heights and widths and to use numerical shape optimization process. The numerical simulations show very good agreement of calculated and measured pressure drop for all variants of the complex geometry of the combined filter. To simulate a real application of the protective filter, the unsteady simulations which follow the human breathing pattern have been performed with the flow rate corresponding to the increased human activity.

CFD Modeling of Heat Exchanger with Small Bent Radius Coils Using Porous Media Model

“…Papers [15][16][17][18][19] also used a simplification of the numerical model since a porous medium was used. In these works, the thermal and hydrodynamic characteristics of the devices under study were determined, and those devices featured very small flow channel dimensions compared to the overall dimensions.…”