2010
DOI: 10.1002/pssc.200982837
|View full text |Cite
|
Sign up to set email alerts
|

Nanocrystallites formation in a‐SiC by low power plasma enhanced chemical vapour deposition

Abstract: Formation of nanocrystallites in the amorphous silicon carbide thin films deposited from silane methane mixture diluted in argon by plasma enhanced CVD has been studied under different levels of rf power density and Ar dilution. Systematic transformations between different polymorphic phases of SiC have been observed with changes in rf power and Ar dilution. At low Ar dilution no H‐SiC (α‐SiC) nanocrystallites was observed. Only traces of β‐SiC of Si were observed. With increase in Ar dilution formation of α‐S… Show more

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1

Citation Types

0
2
0

Year Published

2012
2012
2014
2014

Publication Types

Select...
4
1

Relationship

2
3

Authors

Journals

citations
Cited by 5 publications
(2 citation statements)
references
References 16 publications
0
2
0
Order By: Relevance
“…14,15,21 In this study, the lc-SiC:H multilayer samples designated by #SiC-MLx where x denotes the sample number were deposited in a rf (13.56 MHz) PECVD system from a mixture of SiH 4 and CH 4 in 1:1 ratio diluted by 98.4 vol. % of Ar at a temperature of 200 C and pressure of 26.6 P. The successive lc-SiC:H layers were prepared by toggling the rf power level between 80 mW/cm 3 for high power layer (HPL) and 40 mW/cm 3 for the low power layer (LPL).…”
Section: A Preparation Of #Sic-ml Multilayersmentioning
confidence: 99%
“…14,15,21 In this study, the lc-SiC:H multilayer samples designated by #SiC-MLx where x denotes the sample number were deposited in a rf (13.56 MHz) PECVD system from a mixture of SiH 4 and CH 4 in 1:1 ratio diluted by 98.4 vol. % of Ar at a temperature of 200 C and pressure of 26.6 P. The successive lc-SiC:H layers were prepared by toggling the rf power level between 80 mW/cm 3 for high power layer (HPL) and 40 mW/cm 3 for the low power layer (LPL).…”
Section: A Preparation Of #Sic-ml Multilayersmentioning
confidence: 99%
“…2,7,8 Formation of nc-Si within SiC matrix may be achieved by controlling the deposition parameters in a conventional rf (13.56 MHz) plasma enhanced chemical vapour deposition (PECVD) system. [9][10][11][12][13] There are also thermal methods of growth of nc-Si within amorphous silicon carbide films. Solid phase crystallization (SPC) method for nc-Si growth requires a temperature of 1100 • C. 14,15 By Al induced crystallization (AIC) method the growth of grains of nc-Si has been achieved at a much lower temperature than above in a-Si layers.…”
Section: Introductionmentioning
confidence: 99%