Mechanical Properties and Wear Behavior of a Novel Composite of Acrylonitrile–Butadiene–Styrene Strengthened by Short Basalt Fiber

Abdellah, Mohammed Y.; Fathi, Hesham I.; Abdelhaleem, Ayman M. M.; Dewidar, Montasser

doi:10.3390/jcs2020034

Cited by 25 publications

(15 citation statements)

References 40 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Structural deformation, dimensional variations and degradation of sliding parts in commercial working systems necessitate the reduction of the friction and enhancing the performance of the involved counterparts [90]. Therefore, all aspects of mechanical, chemical, and materials sciences are involved simultaneously to boost up the performance of a system [86,91,92]. The earliest spikes of considering tribology as a science was seen in the development of high velocity internal combustion engines in the beginning of 20th century [93].…”

Section: Tribology Theorymentioning

confidence: 99%

Recent Progress in the Study of Thermal Properties and Tribological Behaviors of Hexagonal Boron Nitride-Reinforced Composites

et al. 2020

View full text Add to dashboard Cite

Ever-increasing significance of composite materials with high thermal conductivity, low thermal expansion coefficient and high optical bandgap over the last decade, have proved their indispensable roles in a wide range of applications. Hexagonal boron nitride (h-BN), a layered material having a high thermal conductivity along the planes and the band gap of 5.9 eV, has always been a promising candidate to provide superior heat transfer with minimal phonon scattering through the system. Hence, extensive researches have been devoted to improving the thermal conductivity of different matrices by using h-BN fillers. Apart from that, lubrication property of h-BN has also been extensively researched, demonstrating the effectivity of this layered structure in reduction of friction coefficient, increasing wear resistance and cost-effectivity of the process. Herein, an in-depth discussion of thermal and tribological properties of the reinforced composite by h-BN will be provided, focusing on the recent progress and future trends.

show abstract

Section: Tribology Theorymentioning

confidence: 99%

Recent Progress in the Study of Thermal Properties and Tribological Behaviors of Hexagonal Boron Nitride-Reinforced Composites

et al. 2020

View full text Add to dashboard Cite

show abstract

“…All the samples points plotting located in the high expansive clay zone of the diagram, Esna Shale as a destructive agent and its effect on heritage buildings and sites. The Esna Shale was classified as high expansive soil by many autho (Abdellah, Fathi, Abdelhaleem, & Dewidar, 2018;Ayman et al, 2016;Cross, 2008;Ismail, Anderson, & Rogers, 2005;Zeid, Attia, & Abdellah, 2015;Wüst & McLane, 2000). Figure 6 shows Unified Soil Classification System (USCS) in which the samples were found in high expansive soil according to Unified Soil…”

Section: Bulk Esna Shale Mineralogymentioning

confidence: 99%

Evaluation of the Expansive Esna Shale and Its Role in the Deterioration of Heritage Buildings at West Bank of Luxor

Gelany¹,

Zeid²,

El-sadek³

et al. 2019

GEP

View full text Add to dashboard Cite

The heritage buildings at the west bank of Luxor were affected by expansive Esna shale differentially from site to others. The role of expansive Esna shale was evaluated by using X-ray diffraction spectra (particle size, strain), X-ray fluorescence, basic soil properties test, swelling test, soil classification, and unconfined compression test. Three different samples were examined to determine the expansive role in the deterioration of heritage sites. The expansive is high, according to: (a) Soil classification based on plasticity index, (b) Classification chart based on the liquid limit and plastic index, (c) Classification chart based on clay content and activity, (d) Soil classification, and (e) Swelling pressure which determines the safety factor. In addition, expansive classification assesses that Esna shale Formation is one of environmental hazards characterized by damage role near Nile flood and irrigation area and characterized by deterioration role in heritage sites far from Nile flood and irrigation area. This paper refers to evaluation as a main process of integrated conservation approach.

show abstract

“…When Short Basalt Fiber (SBF) filler material was used for ABS composite, there is a weaker interfacial bonding between composite and the filler material. With an increase in the percentage of SBF content, wear strength and surface hardness is enhanced, while the weakness of the interfacial bonding between fiber and composite leads to a decrease in the impact strength (6) . Teflon nanoparticles with Nylon 6 composite increased the tensile strength and reduced the ductility of the material.…”

Section: Introductionmentioning

confidence: 99%

Characterization of mechanical and wear properties of ABS/SiO2 nanoparticles

Kumar¹,

Reddy²

2020

IJST

View full text Add to dashboard Cite

Objective: In this present work, the SiO2 nanoparticles as filler materials and ABS as a matrix material taken for the injection molding process to prepare the specimens, after that, to study the enhancement of mechanical properties and wear performance of composite materials. Method/Findings: SiO2 nano particles are added to Acrylonitrile Butadiene styrene(ABS) polymer composites at various weight fractions. It is also found that tensile strength, hardness, and wear properties improved in reinforcement. A pin-on-disc type friction and wear monitor (ASTM G99) was employed to evaluate wear behavior of ABS/SiO2 polymer composites. In this experimental study, the input process parameters such as load, sliding distance, and speed are considered and optimized for the composite materials’ properties. Tensile tests and wear tests were conducted to examine, and the properties of the material were studied. Morphology of the fractured material was studied using SEM analysis. The wear debris observed to explore the flacks and groves of the content during wear test for this study Orthogonal array (L9) and control parameters. Applications/Improvements : The significant contributions of this work are the decrease of ultimate strength with increasing content of SiO2 in the composites, and the sliding speed conversed to 45.51% of the wear rate variation. Mechanical and wear properties of ABS/SiO2 nanoparticles polymer composites were studied further. Keywords: ABS; SiO2 Nanoparticles; tensile; hardness; wear; SEM

show abstract

Mechanical Properties and Wear Behavior of a Novel Composite of Acrylonitrile–Butadiene–Styrene Strengthened by Short Basalt Fiber

Cited by 25 publications

References 40 publications

Recent Progress in the Study of Thermal Properties and Tribological Behaviors of Hexagonal Boron Nitride-Reinforced Composites

Recent Progress in the Study of Thermal Properties and Tribological Behaviors of Hexagonal Boron Nitride-Reinforced Composites

Evaluation of the Expansive Esna Shale and Its Role in the Deterioration of Heritage Buildings at West Bank of Luxor

Characterization of mechanical and wear properties of ABS/SiO2 nanoparticles

Contact Info

Product

Resources

About