KEM 2009 DOI: 10.4028/www.scientific.net/kem.409.137 View full text
|
|
Share
Stojana Veskovic-Bukudur, Tanja Leban, Milan Ambrozic, Tomaž Kosmač

Abstract: The wear resistances of four standard-grade high-alumina ceramics were evaluated and related to their machining ability. Three of the material grades contained 96% of alumina and 4% of either calcium silicate, or magnesium silicate, or manganese titanate in the starting-powder composition. The nominal alumina content in the fourth material was 99.7%. The specimens were fabricated using a low-pressure injection-molding forming technique, followed by thermal de-binding and sintering. After sintering the four mat…

expand abstract