Identifying a suitable heat setting temperature to optimize the elastic performances of cotton spandex woven fabric

Abstract

Purpose The purpose of this paper is to facilitate the production of cotton spandex woven fabric with some user-friendly properties like wearer comfort, super stretch and elasticity. The findings could contribute to ease spandex production and to optimize its property of elasticity. Stretch or a super stretch property is generally desirable, as it can increase the comfort level of those who wear it. In this experiment, the difficulties which were identified while manufacturing cotton spandex woven fabric resolved after identification. Design/methodology/approach In this experiment, three types of cotton spandex woven fabrics, with different composition and constructions, were used to find out their elastic properties. Temperature ranging from 160°C to 200°C with the machine speed of 20 to 26 MPM (meter per minute) was applied with an adjusted industrial setting with the facilities of a stenter machine to optimize the properties of cotton spandex woven fabric. Findings The findings establish that the temperature treatment closely compacted the elastic portions with cotton fibers, giving stability to the spandex yarn, which as a result, influenced cotton spandex woven fabric’s elastic properties, namely, stretch, growth and recovery. The consequences of temperature on cotton spandex yarns were assessed using a microscope, and the results were subsequently analyzed. Research limitations/implications Because of the poor facilities in testing laboratory, only few tests with microscopic evaluation were conducted to assess the elastic performances of cotton spandex woven fabric. Practical implications It is a practice-based research, and the findings could be beneficial to personnel in the textile industry, who are responsible for the manufacturing of cotton spandex woven fabric. Social implications This research could enhance the wearer’s satisfaction, with some comfort elastic properties, which can have a positive influence over spandex clothing industries. Originality/value This research establishes that heat setting had a progressive influence on the production of cotton spandex woven fabric and for the optimization of its elastic performances. This research opens a possible way for scholars to further study in this field.

Clothing manufacturing and exporting countries of the World: a review

“…44 Reliable sustainability within the clothing industry is only conceivable when one deliberates how economic welfares to the industry can be justifiably shared through a society and how the business can manner production while meeting the basic requirements, empowering, and guaranteeing the well-being of all investors. 45 On typical, apparel industrial labors are paid two-thirds of the hourly salary earned by workforces in other manufacturing productions. 46 As part of the literature lecturing these subjects, academics note an amplified need for checking factories for acquiescence with social standards, counting better methods for journalism and deciding issues of exploitation, allowing workers, and allowing employees the right to cooperative negotiating.…”

Implementation of Pre-Heating System in Stenters for Improving Machine Performance and Increasing Efficiency

“…Despite the desired high rate of heat transfer from the hot cylinder surface to the surface of contact fabric, the risk of distortion of delicate fabric surface and unwanted consequence produced by adherence of heat-transferred materials in different portions within fabric drew special attention [11]. Also, as the fabric is simultaneously needed to show plastic nature to achieve desired dimensional stability so the fabric should not be too dried in the cylinders [12]. Regarding these issues, the present work has been concentrated on the latest and highly developed pre-heating modules that are smoothly operated in the experimental case of the study.…”

Implement of Predrying to Enhance Productivity of Existing Stenter in Knit Finishing Industry

“…In Stenter, squeezed wet fabric pass through the first chamber of stenter at the highest of about 150-2000C and water inside fabric is vaporized [8]. If speed of the fabric is increased then, the rate of the vaporization decreased and vice-versa [9].…”