In situUV curable 3D printing of multi-material tri-legged soft bot with spider mimicked multi-step forward dynamic gait

Abstract

Soft bots have the expedient ability of adopting intricate postures and fitting in complex shapes compared to mechanical robots. This paper presents a unique in situ UV curing threedimensional (3D) printed multi-material tri-legged soft bot with spider mimicked multi-step dynamic forward gait using commercial bio metal filament (BMF) as an actuator. The printed soft bot can produce controllable forward motion in response to external signals. The fundamental properties of BMF, including output force, contractions at different frequencies, initial loading rate, and displacement-rate are verified. The tri-pedal soft bot CAD model is designed inspired by spider's legged structure and its locomotion is assessed by simulating strain and displacement using finite element analysis. A customized rotational multi-head 3D printing system assisted with multiple wavelength's curing lasers is used for in situ fabrication of tripedal soft-bot using two flexible materials (epoxy and polyurethane) in three layered steps. The size of tri-pedal soft-bot is 80 mm in diameter and each pedal's width and depth is 5 mm×5 mm respectively. The maximum forward speed achieved is 2.7 mm s −1 @ 5 Hz with input voltage of 3 V and 250 mA on a smooth surface. The fabricated tri-pedal soft bot proved its power efficiency and controllable locomotion at three input signal frequencies (1, 2, 5 Hz).

Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds

“…Among the materials used for AM polymers have become a main center of interest for a wide range of applications, in addition to metals [16] and ceramics [17]. Versatility and synthetic adaptability have made polymers the most used for AM processes [18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33]. Fused deposition modeling (FDM) or so-called fused filament fabrication (FFF) is one of the most popular AM processes due to its simplicity.…”

3D printing for soft robotics – a review

“…The soft robots are the next generation of robots which are elastically soft and capable of safely cooperating with humans or steering through constrained environments. Just as a mouse or octopus can squeeze through a small hole, a soft robot must be elastically deformable and capable of steering through narrowed spaces without inducing damaging internal pressures and stress concentrations [ 3,4 ].…”

Multimaterial 3D Printed Soft Actuators Powered by Shape Memory Alloy Wires

“…Although some recent studies have used 3D printing in fabricating SMA based actuators [30][31][32][33], they have not tried to tailor the actuator deformation using different printing materials. Also, developing a predictive model to simulate the actuator deformation and study the effect of printing materials properties on its performance is of critical importance.…”