Heat Transfer Enhancement in a Novel Annular Tube with Outer Straight and Inner Twisted Oval Tubes

Abstract

The thermal-hydraulic performance in a novel annular tube formed by outer straight and inner twisted oval tubes is numerically investigated. An annular tube formed by two straight oval tubes is also studied for comparison. Inner twisted oval tubes with different aspect ratios and twist ratios are studied. The heat transfer is well improved by the symmetrical secondary flow in the annulus. The Nusselt number generally increases when the inner oval tube becomes flatter and the twists stronger in the studied range of geometrical parameters. The largest Nusselt number Nu of the inner twisted tube increases by 116% while the friction factor f increases by only 46% compared with that of the inner straight tube, and the largest value of the thermal performance factor (JF) can be up to 1.9. Correlations of the Nusselt number and friction factor are proposed for laminar and turbulent flows, and the deviations of the correlations are within ±5% and ±4% for Nu and f, respectively.

A Comprehensive Review Study on Heat Transfer Improvement Techniques Within Twisted Tubes

“…This type of twisted elliptical tube (and oval) has been the topic of many numerical, and experimental studies. the first research based on numerical analysis was prepared by Luo et al [16] numerically examined The heat transfer between the straight outer tube and the twisted inner tube of an annular, as depicted in Fig. 1.…”