Field-Effect Transistors Based on Silicon Nanowire Arrays: Effect of the Good and the Bad Silicon Nanowires

Abstract

Aligned arrays of silicon nanowires (aa-Si NWs) allow the exploitation of Si NWs in a scalable way. Previous studies explored the influence of the Si NWs' number, doping density, and diameter on the related electrical performance. Nevertheless, the origin of the observed effects still not fully understood. Here, we aim to provide an understanding on the effect of channel number on the fundamental parameters of aa-Si NW field effect transistors (FETs). Toward this end, we have fabricated and characterized 87 FET devices with varied number of Si NWs, which were grown by chemical vapor deposition with gold catalyst. The results show that FETs with Si NWs above a threshold number (n > 80) exhibit better device uniformity, but generally lower device performance, than FETs with lower number of Si NWs (3 ≤ n < 80). Complementary analysis indicates that the obtained discrepancies could be explained by a weighted contribution of two main groups of Si NWs: (i) a group of gold-free Si NWs that exhibit high and uniform electrical characteristics; and (ii) a group of gold-doped Si NWs that exhibit inferior electrical characteristics. These findings are validated by a binomial model that consider the aa-Si NW FETs via a weighted combination of FETs of individual Si NWs. Overall, the obtained results suggest that the criterions used currently for evaluating the device performance (e.g., uniform diameter, length, and shape of Si NWs) do not necessarily guarantee uniform or satisfying electrical characteristics, raising the need for new growth processes and/or advanced sorting techniques of electrically homogeneous Si NWs.

Complementary Metal Oxide Semiconductor Compatible Silicon Nanowires-on-a-Chip: Fabrication and Preclinical Validation for the Detection of a Cancer Prognostic Protein Marker in Serum

“…The fabricated SiNW FET devices consisting of 4 independent nanowire arrays were therefore thoroughly characterized to establish their key electronic features. The implementation of multiple independent nanowire arrays with separated source/drain contacts is critical for providing reliable detection 27 in clinical applications. The stable transfer characteristic of the fabricated SiNW chips presented in Fig.…”

CMOS-Compatible Silicon Nanowire Field-Effect Transistor Biosensor: Technology Development toward Commercialization

“…To compromise between sensitivity and stability, nanowire arrays are commonly used and are considered superior in terms of reliability and reproducibility [ 95 , 116 , 127 ]. In such arrays, the device sensitivity is averaged from the conductance changes of each individual nanowire [ 127 ]. The pitch size plays a role in the sensing performance.…”

Study of Porous Silicon Prepared Using Metal-Induced Etching (MIE): a Comparison with Laser-Induced Etching (LIE)

“…p-Si is still being studied due to its applications in various fields in addition to optoelectronic devices [1][2][3][4][5][6][7]. Many reports shows applications of p-Si in advanced sensing [8][9][10][11], in making electrodes for batteries [12,13], in carrying out mass spectroscopy [14] in carrying out mass spectroscopy [15] and in field effect transistors [16,17]. Different methods to fabricate p-Si & its various applications/properties have been studied in depth and very good reports are available [18,19].…”