Experimental studies on re-hydration of vacuum freeze-dried Asparagus (Asparagus officinalis L.) with a hydrophilic substance

Abstract

Vacuum freeze-drying is one of the best water removal methods, with final products of the highest quality. The solid-state of water during freeze-drying protects the primary structure and the product's shape with minimal volume reduction. As the leading quality problem of dehydrated green Asparagus, this experiment was to study the technique of improving the rehydration of dehydrated green Asparagus by adding a hydrophilic substance (Maltodextrin, sucrose, salt) and controlling two ways in the process of vacuum freeze-drying. The mixed solution was soaked at the rate of three different concentration ratios, i.e., 1 (10%), 2 (15%), and 3 (20%) for maltodextrin, sucrose, and salts, respectively, using the L9 orthogonal and two-factor comparison experiment. It was concluded that increasing the mass of the Asparagus samples decreased the convective heat transfer coefficient. The evolution of drying months in the range of 1.78 -4.74 W/m 2˚C was recorded for the mass of Asparagus samples. The results noted that to dry the Asparagus by vacuum freeze-dryer from 09:00 to 18:00 hour decreases the product's drying rate up to 0.011g.(H2O).g -1 (d. m).cm -2 .hr -1 and moisture level up to 8%. The study results noted that the pre-freezing condition was 23°C with the frozen time of 4 hours, which could remarkably improve the vacuum freeze-dried green asparagus rehydration. Finally, from the results, it was recommended that, from the actual production, to save energy, reduce costs; 23 o C was better for the precooling temperature with the pre-freezing time was 4 hours for drying green Asparagus.

Effect of Hot Air Drying Temperature on Drying Kinetics, Physico-Chemical Properties, and Energy Consumption of Culture Asparagus (Asparagus officinalis L.)

“…As a result of the literature review, it was determined that there are only a few methods for drying culture asparagus (Asparagus officinalis L.). Some of them are vacuum freeze-drying [27], a forced convection process [28], tray, spouted bed, combined microwave and spouted bed drying, refractance window and freeze-drying [29], drying using hot air oven and microwave oven [30], drying using microwave oven and hot air oven [31], drying using traditional oven and microwave oven [32], vacuum, far-infrared, hot air, and freeze drying (asparagus stems) [33].…”