Effects of Particle Strength of Feedstock Powders on Properties of Warm-Sprayed WC-Co Coatings

Abstract

Warm Spray (WS) process, which can control the temperature of a combustion gas jet used to propel powder, has been successfully applied to deposit WC-Co coatings. Detrimental reactions resulting from dissolution of WC into Co binder and decarburization were suppressed effectively by keeping the WC-Co particles’ temperature below the m.p. of the binder phase. In this study, three nano-structured WC-12Co powders with different particle strength were prepared by changing the sintering conditions of spray-dried powder and were deposited by WS. The deposition efficiency and porosity of the coatings decreased with increasing the particle strength. The coating deposited from the powder with very low particle strength showed significant phase changes, while those deposited from the higher particle strengths showed almost no change. Particle Image Velocimetry revealed significant disintegration of the weakest powder, which explains the changes observed. The hardness and wear properties of the former coating, therefore, were inferior to the other two.