Effective Removal of Copper Ion from Aqueous Solution using Beads of Chitosan-Choline Chloride/Glycerol Deep Eutectic Solvent

Abstract

Herein, an adsorption process based on a new adsorbent was utilized to remove copper ion (Cu(II)), an environmental pollutant, from water. Reprocessed porous beads based on powder chitosan highly aid the industrial treatment of water. Chitosan–deep eutectic solvent (DES) beads were prepared from chitosan and DES. The DES used were choline chloride–urea (DES A) and choline chloride–glycerol (DES B). Both chitosan–DES beads were used to remove Cu(II) from an aqueous solution. Based on the characterisation results, chitosan-DES A showed a higher chemical and thermal stability when compared to chitosan-DES B. For the type of adsorbents, chitosan-DES B showed a higher removal percentage of Cu(II) (90.92 %) than chitosan-DES A (7.5 %). Therefore, chitosan-DES B was chosen as the preferred adsorbent for Cu(II). The optimum conditions for the removal of Cu(II) from an aqueous solution were using 0.09 g of chitosan-DES B with 40 min of shaking time and 1 mg L-1 of initial concentration.