Development and validation of system for measuring poling forces during Nordic walking

Abstract

BACKGROUND:Recently, the popularity of Nordic walking (NW) has been rising steadily. Many scientific studies researched the promising and beneficial effects of this form of physical activity. However, only a few studies provided data about the forces acting on the poles. We did not find a commercially available system that enables the measurement of the poling forces. OBJECTIVE: The objective of this paper was to develop and validate a system for measuring the poling forces during NW. METHODS: Strain gauge force tranducers were mounted below the grips of standard NW poles. The transducer signals were amplified and converted to digital form for transmitting to a personal computer. Special software was developed for processing the measured data and the calculation method of output variables was described. Validation of the system was performed using a Kistler force plate. Poling cycles with peak force of about 150 N were imitated by pressing the pole over a force plate. RESULTS: A function sample of the measurement system was constructed. Validation yielded the mean absolute error of 1.1 N in case of poling cycles without pole impacts or 3.0 N in case of poling cycles with impacts. CONCLUSIONS: The validation result of our system is comparable to the results of similar systems used for measurements during cross-country skiing. The system enables independent measurement of the poling forces on both poles and the duration of measurement can be up to one hour. The system provides a tool that can be used to answer a number of questions that researches raise about NW. Understanding of the biomechanical and physiological aspects of poling action can constitute a scientific basis for promoting, teaching and training of NW.

Nordic walking multibody analysis and experimental identification

“…There are other research studies developing monitoring integrated systems, also in ski-sport. [19][20][21] The information given by this type of experimental set-up can be compared to a multibody (MTB) model of a Nordic walker that is able to replicate the same body movements.…”