Design and implement a smart system to detect intruders and firing using IOT

Abstract

The security system is essential for occupants' convenience and protection from intruders and fire. Theft and fire are the most important requirement for the security system. The advancement of wireless sensor networks using IOTs increased the features in a security system and play an important role in daily life. In this paper, the proposed system is divided into two units. The first one about security which use to take snapshots by a camera whenever there is fire or intruders in the security zone and mail it to the owner every three seconds by using Arduino configured with MATLAB program. MATLAB program plays the main role to coordinate between sensors and to turn on/off the cameras. The second unit is about controlling the appliances and also the main door by using AVR microcontroller configured by CVAVR software that connected with Bluetooth sensor and controlled by a smartphone by using the implementation software built-up in the smartphone. To arrival of the control unit, the user should send code from the software implementation to the framework that use to turn on /off the devices or open/close the door. This proposed system is designed and implemented in details in this paper.

Automation conditions of mobile base station shelter via cloud and IoT computing applications

“…The air-conditioner will reduce the hightemperature degree and cools the space to about 25 o C. However, to make this process done in an automated way throughout the day, in this paper, a proposed technical solution has been suggested. Our proposed solution depends on the IoT principle [1]- [5] and the firebase cloud service computing [6]- [8]. Monitoring ISSN: 2088-8708  Automation conditions of mobile base station shelter via cloud and IoT… (Ahmed Hussein Shatti) 4551 the equipment of the BTS, reading sensor measurements, and storing the information through the internet, all these functions have been implemented through our work with the help of the Raspberry Pi4 module.…”

Design and prototyping of an accelerometer based parallel manipulator for endoscope position control

“…3-degree of freedom (3-DOF) parallel manipulators for minimally invasive surgery are the current trend, structurally parallel manipulators (PM) are well suited for robotic-assisted surgeries due to their inertia and stiffness compared to serial manipulators. The traditional 3-DOF parallel manipulators are popularly called delta robots, (need to write drawback of 3-DOF) [6], [7]. Concerning steward platform design, many multi DOF, greater than 3, 4 and 6 leg mechanisms have been proposed.…”