Degradation of glyphosate herbicide by an electro-Fenton process using carbon felt cathode

Decomposition and mineralization of glyphosate herbicide in water by radical and non-radical pathways through peroxymonosulfate activation using Co3O4/g-C3N4: a comprehensive study

“…12,96 The electro-Fenton method has a high Gly decomposition efficiency, but it also has some disadvantages such as high electrical energy consumption and strict pH of around 3. 92,97 The wet oxidation method has the advantage of treating Gly at high content ( e.g. , 100 mg L −1 ) but its disadvantage is that the reaction conditions occur at high temperature and high pressure with relatively low decomposition efficiency.…”

The Study on Some Parameters Affecting the Degradation of Methylene Blue in Water by Electro-Fenton Using Ti/Pbo2 Anode

“…The optimal pH value and Fe 2+ concentration found above were used for the AO-EF process. For single AO and EF processes, the optimal conditions were determined in previous works by the same authors, namely [Fe 2+ ] = 0.1 mM, pH 3.0 for the EF process [26] and pH 3.0 for the AO process [27]. In these tests, MB concentrations were determined at different time points, ranging from 0 to 60 min.…”

Treatment technologies and degradation pathways of glyphosate: A critical review

“…Electro-Fenton process overcomes the limitations of the accumulation of iron sludge, the high costs and risks. It is reported that 91.9% glyphosate removal and 81.6% TOC removal have been achieved by electro-Fenton oxidation through using a carbon fibre cathode (Tran et al, 2019). However, this process consumes extensive anode.…”