Assessment of the Impact Resistance of a Composite Material with EN AW-7075 Matrix Reinforced with α-Al2O3 Particles Using a 7.62 × 39 mm Projectile

Abstract

The paper presents the results of studies on the effects of shooting composite materials produced by pressure infiltration with the EN AW-7075 alloy as a matrix and reinforcement in the form of preforms made of α-Al2O3 particles. Composite materials were made with two reinforcement contents (i.e., 30% and 40% vol. of α-Al2O3 particles). The composites produced in the form of 12 mm thick plates were subjected to impact loads from a 7.62 × 39 FMJ M43 projectile fired from a Kalashnikov. The samples of composites with different contents of strengthening particles were subjected to detailed microscopic examination to determine the mechanism of destruction. The effect of a projectile impact on the microstructure of the material within the perforation holes was identified. There were radial cracks found around the puncture holes and brittle fragmentation of the front surfaces of the specimens. The change in the volume of the reinforcement significantly affected the inlet, puncture and outlet diameters. The observations confirmed that brittle cracking dominated the destruction mechanism and the crack propagation front ran mainly in the matrix material and along the boundaries of the α-Al2O3 particles. In turn, numerical tests were conducted to describe the physical phenomena occurring due to the erosion of a projectile hitting a composite casing. They were performed with the use of the ABAQUS program. Based on constitutive models, the material constants developed from the identification of material properties were modelled and the finite element was generated from homogenization in the form of a representative volume element (RVE). The results of microscopic investigations of the destruction mechanism and numerical investigations were combined. The conducted tests and analyses shed light on the application possibilities of aluminium composites reinforced with Al2O3 particles in the construction of add-on-armour protective structures.

In Situ Formation of ZrB2 and Its Influence on Wear and Mechanical Properties of ADC12 Alloy Mixed Matrix Composites

“…The impact strength of the composites decreases as the wt.% of the reinforcement increases due to the presence of hard ceramic particles. Similar observation also reported by previous researchers [ 29 , 30 , 31 ]. The de-bonding of ceramic reinforcement and matrix occurs easily during impact testing.…”

Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density

“…They demonstrate a high range of deformation under various loading conditions, where the damage mechanism is usually caused by buckling, bending, and shearing [ 26 ]. These properties are particularly important for energy absorption and crashworthiness applications, where a wide range of material deformations without a damage mechanism such as cracking suddenly occurring are required [ 27 , 28 , 29 , 30 , 31 , 32 ].…”

Experimental and Numerical Study of Ballistic Resistance of Composites Based on Sandwich Metallic Foams

“…The characteristics of the material properties of the projectile and the used polymers [55][56][57][58][59] E-Young's modulus; v-Poisson's ratio; r-density was presented in the form of a cubic geometry, which was digitized with solid elements. The interaction between the core and the facings has been assigned to the function "hard" contact.…”