Assessment of extreme and metocean conditions in the Maldives for OTEC applications

Abstract

Summary The Maldives is a group of tropical atolls, considered globally to be one of the most desirable holiday destinations. There is an urgent requirement to decrease their dependency on fossil fuels that are currently the main source of energy, and a number of renewable energy alternatives are being evaluated. Among these, due to the favorable oceanographic and bathymetric conditions, ocean thermal energy conversion (OTEC) systems represent a viable opportunity for clean and reliable power. However, the stresses the OTEC platform will need to endure during adverse environmental conditions are not well defined. The magnitude of these stresses will then have a direct influence on the design of the OTEC device. In order to overcome this uncertainty, this paper uses hindcast data sets from global weather and ocean models to assess the metocean conditions of the Maldives, with particular reference to extreme conditions. After selecting a suitable location for the deployment of the devices, return values calculated using the peaks‐over‐threshold (POT) methodology are estimated for wind, waves, and currents. The 100‐year return value for the significant wave height is found to be 4.5 m, with a joint occurrence of energy periods between 7.5 and 8.5 seconds, whereas the 100‐year return wind has a velocity of 17.8 m/s and the 100‐year return current of 1.9 m/s. The directionality of these extreme events is also considered, showing the southern and western sub‐quadrants as the prevailing sources, which provides essential information for positioning of the platform. Additional evaluations of tropical revolving storms (TRS) and variations in temperature and salinity patterns are also provided over a 1500‐m water column; temperature varies by approximately 24°C, and salinity by around 2 ppt, showing the suitability of OTEC platforms in the Maldives. This work is therefore of interest to offshore renewable energy stakeholders interested in developing a project in the Maldives or those conducting an analogous analysis in other locations.

Incorporating stochastic operation and maintenance models into the techno-economic analysis of floating offshore wind farms

“…The second was used to retrieve the data related to the water current speed and direction, according to the model illustrated in [48]. More information on both platforms can be found in [49]. Due to the resolution of these hindcast models, and considering the relatively short distance between the two projects (47 km), the two locations are considered close enough to assume that they experience the same weather.…”

Offshore Renewable Energy

“…A difference in temperature of at least 20°C is desired in order to activate a thermal cycle. As such, this technology is especially suitable for locations benefitting from a warm water surface all year round, e.g., the Maldives [10]. Through heat exchangers, a power turbine is then activated before condensing the fluid and restarting the cycle.…”