Analytical quality-by-design approach for development and validation of HPLC method for the simultaneous estimation of omarigliptin, metformin, and ezetimibe: application to human plasma and dosage forms

Abstract

A simple, selective, and sensitive RP-HPLC method was proposed for the simultaneous determination of two co-administered antidiabetic drugs (omarigliptin and metformin) with an anti-hyperlipidemic drug (ezetimibe) in a medicinally-recommended ratio of 2.5:50:1, respectively. The proposed procedure was optimized by adopting a quality-by-design approach. The influence of different factors on chromatographic responses was optimized by applying the two-level full factorial design (25). The optimum chromatographic separation was achieved using Hypersil BDS C18 column at 45 °C, and the mobile phase pumped isocratically composed of methanol: potassium dihydrogen phosphate buffer (6.6 mM; pH 7, 67:33% v/v) at a flow rate of 0.814 mL/min using 235 nm as a detection wavelength. The developed method was capable of separating this novel mixture in less than 8 min. The calibration plots of omarigliptin, metformin, and ezetimibe showed acceptable linearity over the ranges of 0.2-2.0, 0.5–25.0, and 0.1-2.0 µg/mL with quantitation limits of 0.06, 0.50, and 0.06 µg/mL, respectively. The proposed method was successfully applied to determine the studied drugs in their commercial tablets with high % recoveries (96.8-102.92%) and low % RSD values (less than 2%). The applicability of the method was extended to the in-vitro assay of the drugs in spiked human plasma samples with high % recoveries (94.3-105.7%). The suggested method was validated in accordance with ICH guidelines.