Analytical Expression of <i>T-v</i>_C Dependence in Standard ISO 3685 for Cutting Ceramic

Abstract

Durability is very important property of every cutting material. This property of cutting materials defined theirs life-time. Technical science defines a lot of different factors, that they may be cause of shorter life-time of cutting tool. Maximally possible elimination of these factors is necessary for optimization of cutting materials life-time. Durability of cutting materials is defined in standard ISO 3685. The main part of standard ISO 3685 is T-vc dependence definition for selected cutting materials. One of these cuting materials contained in this standard is cutting ceramic. Standard ISO 3685 contains instructions how to create T-vc dependence for cutting tools made of cutting ceramic. In this standard are only instructions how to create T-vc dependence according to Taylor, but last part of every experiment is analytical expression of tested dependence. The article describes process how to define and analytically express T-vc dependence for cutting ceramic (Al2O3).

Implementation of Integrated Management System in Order to Enhance Equipment Efficiency

“…Todic et al [20], Durdan et al [4] and Krenicky [11] implemented multifactorial monitoring methods for evaluation of complex variation of characteristics. Cacko & Krenicky [2], Panda et al [15,16], Olejarova et al [14] and Prislupcak et al [17] provided analysis of exposed parts technical characteristics in order to determine the operating status and durability, Jurko et al [10], Monkova & Monka [13] and Valicek et al [21] developed methods and gave examples of the evaluation of particular properties.…”

“…When jointly implementing standards for management systems developed by ISO (such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 [6,7,8] and others), the process of creating an integrated management system is greatly facilitated by the fact that all these standards are developed using common approaches, in the general, if you can say so, economic situation and using a single policy of technical regulation. All this allows you to combine the requirements of different control systems in a single, integrated management system [3,15,21]. However, existing scientific developments and methodological materials do not address the simultaneous implementation of requirements standards developed in different countries, and, therefore, in different economic and social conditions, and that have specific national differences.…”

Effect of thermal degradation on rheological properties of polymeric materials

“…Rheology deals with the flow and deformation of materials under the influence of force. The flow properties of materials are measured using a rheometer [1]. Rheological properties are determined for all types of materials.…”

Properties Prediction of Linear Block-Polyurethanes Based on the Mixtures of Simple Oligoethers

“…Therefore, the relationship study of linear block-polyurethanes (BPU) based on mixtures of oligoethers structure with strength, deformation, rheological and tribotechnical characteristics, mathematical prediction of their behavior in different operating conditions, taking into account the quality indicators of the material, is of great practical importance for use in industry [3,4,14,16]. It was found that main characteristics that determine the properties of linear block-polyurethanes are their molecular weight and the concentration of rigid segments in a macromolecule [11,13,19,20]. It is possible to obtain materials with preset exploitation characteristics by adjusting these parameters at the stage of synthesis.…”