Analysis of sag mill machine performance using overall equipment effectiveness and failure model and effects analysis method

Abstract

The mining company uses a variety of grinding machines to process minerals, whereas the most common type of machine is the Semi-Autogenous Grinding SAG Mill machine. This machine is employed for the mining process of hard rock as raw material into gold, copper, and silver. However, the SAG Mill machines are often broken, even suddenly not working, with an average loss time of 97.30 hours which impacts a decrease in efficiency and production quality of up to 40%. It can cause losses that do not reach the production target. This research aims to measure the effectiveness of the SAG Mill machine and determine the failure using the OEE and FMEA methods. The results showed that the SAG Mill machine is still under standardized based on the Japan Institute of Plant Maintenance (JIPM), which is 85%. The FMEA method and RPN value apply to analyze downtime losses, and idling is the loss that highly affects the effectiveness of SAG Mill machines. Recommendations for the company are to increase the number of equipment that aims to prolong the machine's age and accelerate production. This research contributes to another solution to help maintenance managers by measuring the effectiveness and determining the failure of the SAG Mill machine

Analisis Overall Equipment Effectiveness Pada Barge Loading Conveyor (Blc) Pt Mitra Barito

“…Dengan kata lain, kriteria OEE dapat menjadi tolak ukur keberhasilan metode total productive maintenance (TPM), yang ditunjukkan dengan kinerja mesin yang maksimal dalam menjalankan kegiatan produksi (Shafitri et al, 2022). Faktor yang paling berpengaruh terhadap rendahnya nilai OEE adalah reducing speed losses (Ivan WCS, I., Darsin, M., & Ramadhan, 2020), downtime losses yang terdiri dari equipment failure dan setup and adjustment (Fuadiya & Widjajati, 2022).…”

Analysis of the Quality of Bottled Drinking Water Products through a Six Sigma Approach and Failure Mode and Effect Analysis (FMEA)

“…The color of the water changes not only due to temperature, packaging, storage, but also the tools used to fill water into the packaging must also be clean (Hussein et al, 2022;Tan et al, 2022;Zavarzina et al, 2022). Jadwal perawatan mesin harus sangat diperhatikan untuk mencegah terjadinya mesin rusak dan produk tidak berkualitas (Fuadiya & Widjajati, 2022;Hossayni et al, 2020). In Figure 3 fishbone diagram defects damaged packaging occurs because the material from the raw materials used is not appropriate, the method in storage methods in warehouses is not right, warehouse storage methods are not right, and human negligence in placing boxes / doses that are not appropriate.…”