The current research aims at the manufacturing of Ti-6%Al alloy and Ti-6%Al-4%V alloy using the mechanical alloying method and studying their corrosion behavior after various periods of immersions in 3.5% NaCl solutions. The fabricated alloys were also evaluated using spectroscopic techniques such as X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy analyses. The corrosion behavior was studied using potentiodynamic polarization, electrochemical impedance spectroscopy, and chronoamperometric current-time electrochemical methods. It is confirmed that the presence of 4% V greatly decreases the uniform corrosion of the Ti-6%Al alloy as a result of the role of V in decreasing the cathodic, anodic, and corrosion current, and the rate of corrosion along with increasing the corrosion resistance. Increasing the time of immersion to 24 h and further to 48 h highly decreased the corrosion of the alloys. The presence of 4% V and extending the time of exposure thus increase the resistance against corrosion via decreasing the corrosion of Ti-6%Al alloy in the chloride test solution. ; writing-original draft preparation, E.-S.M.S. and H.S.A.; writing-review and editing, E.-S.M.S.; supervision, E.-S.M.S.; project administration, E.-S.M.S.; funding acquisition, E.-S.M.S. All authors have read and agreed to the published version of the manuscript.