Active implantable sensor powered by ultrasounds with application in the monitoring of physiological parameters for soft tissues

Abstract

Abstract-Ultrasound imaging is a proven diagnostic tool to assess a myriad of physiological and pathological conditions in patients. Throughout the years, ultrasounds have been used as a passive recording modality where the backscattered echo arising from the interaction of the sound waves with the acoustic properties of the biological tissues helps to identify them. Apart from a wide range of therapeutic applications, the acoustic beam has not yet been explored to actuate within the biological environment in an active way. In this paper we present an implantable electronic device to be actuated remotely by ultrasounds with capabilities for measuring several physiological parameters of tissues: pH, temperature, electrolyte concentration and biopotentials. The small factory form device (with no attached batteries) harvests energy from the incoming ultrasound waves and uses it to power the embedded electronics. It operates from voltage levels as low as 0.8 V and consuming a total current of 60 µA (or an average power consumption of 84 µW) in the active mode when deployed at a distance of 3 cm from the active source of ultrasounds in vitro, excited by a sinusoid at 400 kHz with power density of 20 mWcm −2 . The sensor can be actuated by a specifically-designed readout device (as detailed in this paper) or using the traditional medical probes for ultrasound imaging. The actual device can present an alternative to surpass the limitations of inductive and RFpowered sensors implanted in soft tissues.

Wireless Power Transfer Approaches for Medical Implants: A Review

“…The maximum SAR value was studied in [40,41]. The empirical results can be obtained in vivo [8,42,43], using a living organism, or in vitro [44][45][46], outside of a living organism. To mimic the biological effects of human body tissue, the phantom is very popular among researchers in this field.…”

A Review on Miniaturized Ultrasonic Wireless Power Transfer to Implantable Medical Devices

“…Rosa and Yang [75] presented a wirelessly activated implantable device to enable ultrasound emissions for computing biological tissue parameters namely, bio-potentials, thermal gradients, pH, and a concentration of electrolytes. In active mode, the device worked with 0.8 V, and an overall current of 60 µA was consumed at 3 cm separation from the source, by a sinusoid of 400 kHz with 20 mW/cm 2 of power density.…”

Imaging from the implantable side: Ultrasonic-powered EIT system for surgical site infection detection

“…The DC level powers all electronics with total current consumption close to 100 µA. This allows to operate the device at depths of 4 cm, where the harvested level hardly exceeds 0.8 V [10]. The control of the device is performed by a microcontroller (MSP430L092, Texas Instruments) and current switching through the eight available electrodes is performed by a signal multiplexer (TS4100, Silicon Labs).…”