Accuracy Assessment of a Complex Building 3d Model Reconstructed From Images Acquired With a Low-Cost Uas

Abstract

Nowadays, Unmanned Aerial Systems (UASs) are a wide used technique for acquisition in order to create buildings 3D models, providing the acquisition of a high number of images at very high resolution or video sequences, in a very short time. Since low-cost UASs are preferred, the accuracy of a building 3D model created using this platforms must be evaluated. To achieve results, the dean's office building from the Faculty of “Hydrotechnical Engineering, Geodesy and Environmental Engineering” of Iasi, Romania, has been chosen, which is a complex shape building with the roof formed of two hyperbolic paraboloids. Seven points were placed on the ground around the building, three of them being used as GCPs, while the remaining four as Check points (CPs) for accuracy assessment. Additionally, the coordinates of 10 natural CPs representing the building characteristic points were measured with a Leica TCR 405 total station. The building 3D model was created as a point cloud which was automatically generated based on digital images acquired with the low-cost UASs, using the image matching algorithm and different software like 3DF Zephyr, Visual SfM, PhotoModeler Scanner and Drone2Map for ArcGIS. Except for the PhotoModeler Scanner software, the interior and exterior orientation parameters were determined simultaneously by solving a self-calibrating bundle adjustment. Based on the UAS point clouds, automatically generated by using the above mentioned software and GNSS data respectively, the parameters of the east side hyperbolic paraboloid were calculated using the least squares method and a statistical blunder detection. Then, in order to assess the accuracy of the building 3D model, several comparisons were made for the facades and the roof with reference data, considered with minimum errors: TLS mesh for the facades and GNSS mesh for the roof. Finally, the front facade of the building was created in 3D based on its characteristic points using the PhotoModeler Scanner software, resulting a CAD (Computer Aided Design) model. The results showed the high potential of using low-cost UASs for building 3D model creation and if the building 3D model is created based on its characteristic points the accuracy is significantly improved.

Biomimetic Drones Inspired by Dragonflies Will Require a Systems Based Approach and Insights from Biology

“…To obtain a 3D image, the structure from motion technique was used by the 3DF Zephyr software [36] to stitch the captured photographs together. The technique captures colour, visible textures, and structures of the wing.…”

Visualising Urban Air Quality Using Aermod, Calpuff and CFD Models: A Critical Review

“…Figure 13. 3D model of a building generated from Unmanned Aerial System (Oniga, Chirilă, & Stătescu, 2017) The need to visualize air quality in 3D is because of the disadvantages portrayed by 2D visualization. The first disadvantage comes from 2D visualization is in term of dimension itself.…”

To 3D or Not 3D: Choosing a Photogrammetry Workflow for Cultural Heritage Groups

“…Articles those covers benchmarking and compare SfM based reconstruction, however, merely covers FOSS solutions. While few studies cover VisualSfM [8,11,21,31] and Bundler/PMVS [11,13,21], however these studies are rarely tailored for novice users or non-expert users in supporting their involvement in making 3D reconstruction.…”

“…Ample studies have been published so far on image-based modelling software analyzing their performance [3][4][5], accuracy in 3D production [6][7][8], used algorithms [9], and scalability [1,9,10]. A few of them also discuss workflows [11,12].…”