A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

Abstract

Additive manufacturing or 3D printing of materials is a prominent process technology which involves the fabrication of materials layer-by-layer or point-by-point in a subsequent manner. With recent advancements in additive manufacturing, the technology has excited a great potential for extension of simple designs to complex multi-material geometries. Vat photopolymerization is a subdivision of additive manufacturing which possesses many attractive features, including excellent printing resolution, high dimensional accuracy, low-cost manufacturing, and the ability to spatially control the material properties. However, the technology is currently limited by design strategies, material chemistries, and equipment limitations. This review aims to provide readers with a comprehensive comparison of different additive manufacturing technologies along with detailed knowledge on advances in multi-material vat photopolymerization technologies. Furthermore, we describe popular material chemistries both from the past and more recently, along with future prospects to address the material-related limitations of vat photopolymerization. Examples of the impressive multi-material capabilities inspired by nature which are applicable today in multiple areas of life are briefly presented in the applications section. Finally, we describe our point of view on the future prospects of 3D printed multi-material structures as well as on the way forward towards promising further advancements in vat photopolymerization.

Self-healable fiber-reinforced vitrimer composites: overview and future prospects

“…63,64 A similar kind of results were reported regarding the stress relaxation behavior, where in some reports the addition of llers accelerates the stress relaxation, 65 whereas, a slow stress relaxation was observed in other reports. 66,67 The effect of incorporation of silica nanoparticles on stress relaxation and cross-link density recovery has been well analyzed. 68 The functional groups (amine and hydroxyl) onto the surface of silica particles participate in reversible cyclic carbonate aminolysis reactions and transcarbamoylation exchange reactions, with polyhydroxyurethane network, respectively (Fig.…”

Additive manufacturing technology, process parameters influencing product quality and its applications

“…Serving on demand is another process that only serves the necessary amount in the form of drops employing a pump and syringes. Other researchers have used two monomers with automatic exchange of resin chambers after printing layers of each material [35]. Like any AM process, VPP technology has some limitations that must be considered.…”

A practical perspective for chromatic orthogonality for implementing in photolithography

“…Photoresist technology has recently introduced multi-component mixes with special reactive chromophores that respond to a particular light hue 11 . Nearly complete wavelength orthogonality (also known as chromatic orthogonality or chromatic selectivity) between the photoreactive groups is necessary to produce such a selective photoresist 12 . No matter the sequence of the various light hues, it isn't easy to activate the chromophores 13 , 14 .…”