A Novel Wideband Coplanar Waveguide (CPW) Fed Antenna for Energy Harvesting at 2.45 GHz

Abstract

Conversion of electric power from a high voltage to a low voltage causes power losses that also require efficient circuit design techniques to be implemented for durability of a system. Energy harvesting techniques have been implemented to cater to the power demand of low power electronic devices using electromagnetic, electrostatic, and other related technologies. This paper represents the compact design of an antenna system tuned at 2.45 GHz for radio frequency energy harvesting applications. The simulation results achieve a better gain of 5.4 dB along with enhanced radiation patterns. Impedance matching for 50 Ohm is implemented using a high frequency structure simulator (HFSS). The results of the antenna gain, VSWR, and radiation efficiency are compared with the literature. Furthermore, the size of the antenna system has great significance in medical and military related applications; this aspect is also considered in this design and overall, a 20 mm × 37 mm compact antenna is achieved by using mm wave considerations. This antenna design can be embedded in the wireless sensor network (WSN), RFID, and IoT related application to generate the required power required. Mostly, WSN nodes currently use traditional batteries that need to be replaced after some time. As in most cases, WSN nodes are scattered in wide geographical areas, so maintaining the power to these systems becomes challenging. RF energy harvesting provides a solution in these cases where wind, vibration, and solar sources are scarce. The simulated impedance bandwidth is found to range from 1.1 GHz to 5.2 GHz within the acceptable VSWR values.

A Review of Miniaturized Advanced IC Rectenna for Energy Harvesting Applications

“…Several techniques are used to improve the compact size and PCE such as the T-shape, U-shape slots, and circular shape slots that proposed by Chindhi in 2022 [33] and Xu in [34]. VDR rectifiers with the ground coplanar waveguide are used in [35] to improve PCE. Mishu and Song use CMOS bridge rectifiers to increase WPT in energy harvesting applications [36].…”