A New Concept for Modeling Phase Transformations in Ti6Al4V Alloy Manufactured by Directed Energy Deposition

Abstract

The microstructure directly influences the subsequent mechanical properties of materials. In the manufactured parts, the elaboration processes set the microstructure features such as phase types or the characteristics of defects and grains. In this light, this article aims to understand the evolution of the microstructure during the directed energy deposition (DED) manufacturing process of Ti6Al4V alloy. It sets out a new concept of time-phase transformation-block (TTB). This innovative segmentation of the temperature history in different blocks allows us to correlate the thermal histories computed by a 3D finite element (FE) thermal model and the final microstructure of a multilayered Ti6Al4V alloy obtained from the DED process. As a first step, a review of the state of the art on mechanisms that trigger solid-phase transformations of Ti6Al4V alloy is carried out. This shows the inadequacy of the current kinetic models to predict microstructure evolution during DED as multiple values are reported for transformation start temperatures. Secondly, a 3D finite element (FE) thermal simulation is developed and its results are validated against a Ti6Al4V part representative of repair technique using a DED process. The building strategy promotes the heat accumulation and the part exhibits heterogeneity of hardness and of the nature and the number of phases. Within the generated thermal field history, three points of interest (POI) representative of different microstructures are selected. An in-depth analysis of the thermal curves enables distinguishing solid-phase transformations according to their diffusive or displacive mechanisms. Coupled with the state of the art, this analysis highlights both the variable character of the critical points of transformations, and the different phase transformation mechanisms activated depending on the temperature value and on the heating or cooling rate. The validation of this approach is achieved by means of a thorough qualitative description of the evolution of the microstructure at each of the POI during DED process. The new TTB concept is thus shown to provide a flowchart basis to predict the final microstructure based on FE temperature fields.

Analysis of the conversion of Cadmium carbonate (CdCO3) to Cadmium oxide (CdO) in thin films with photocatalytic application

“…Thus, it is clear that the microstructural parameters associated with evolution change significantly at each stage examined. The characteristics in the microstructural evolution of inorganic materials in the solid state are related to phase change, and solidification, among other physicochemical parameters [38]. Our results are consistent with a damaged microstructure dominated by vacancies, highlighting the importance of free surfaces in determining which defects are retained.…”

Benchmarking study between Lagamine and Comsol Solvers for Finite Element Thermal Analyses of Directed Energy Deposition Process

“…12. Therefore, care should be taken when the predicted highest peak temperature is adopted in subsequent calculations, for example, in the solidification process during AM processes (Kumara et al, 2020;Tchuindjang et al, 2021;Xie et al, 2017).…”

Transformation of Information Systems in the Tasikmalaya City Communication and Information Department

“…with the emotional (value system) that exists in society(Tchuindjang et al, 2021).The transformation process contains a dimension of time and socio-cultural changes in the people who occupy it that arise through a long process that is always related to the activities that took place at that time. The transformation process goes through 3 stages, namely: Invention, Diffusion, and Consequences (Settembre-Blundo et al, 2021).…”