A Modified Droop Control Method for Parallel-Connected Three-Phase Inverter in Railway Auxiliary Power Supply

Choi, Bong-Yeon; Kang, Jiwoo; Kang, Kyung-Min; Lee, Hoon; Lee, Sang-Suk; Won, Chung-Yuen

doi:10.1109/itec-ap.2019.8903829

Cited by 1 publication

(3 citation statements)

References 4 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…For the convenience of implementation, the above equation is transformed, and the reference voltage can be calculated by (11).…”

Section: Modified Ac Droop Control For Tpssmentioning

confidence: 99%

“…The impedance phase angle represents the weight of active power and reactive power. When θ = π 2 , equation (11) can be simplified to the conventional droop control.…”

Section: Modified Ac Droop Control For Tpssmentioning

confidence: 99%

“…In [4], the conventional AC droop control scheme is directly applied to single‐phase inverters without the consideration of transmission line impedance. A modified droop control strategy is proposed for railway auxiliary power supply system in [11], but the topology of auxiliary system is different from the full power electronics based TPSS.…”

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

Novel double‐layer DC/AC railway traction power supply system with renewable integration

Zhang

et al. 2020

IET Renewable Power Generation

View full text Add to dashboard Cite

Back-to-back converter based railway traction power supply system (TPSS) can eliminate neutral sections in the traction side and improve power quality in the grid side, but it still has some drawbacks such as low reliability, difficulty in accepting largecapacity renewable energy, and power mismatches. In this paper, a double-layer DC/AC TPSS with renewable integration is proposed to address these challenges and to improve system performance. The proposed topology breaks the limit of back-toback structure and enables more flexible free energy flow. A top-down system design method is proposed in this paper. Firstly, the characteristics of the proposed TPSS for integration with renewable power are described and compared with the traditional back-to-back topology. Secondly, a DC droop controller and a AC droop controller are designed for DC layer grid and AC layer grid respectively to control the power flow in each layer. The traditional AC droop control is based on the inductive transmission impedance, but the resistance of traction transmission line cannot be ignored. Thus a modified droop control strategy with the consideration of line resistance is also proposed in this paper. Subsequently, the voltage control strategy for the single MMC converter is designed to track the reference signal from the upper droop controller. Finally, a general double-layer DC/AC TPSS is designed from bottom to top, and the simulation results confirm that the proposed TPSS with renewable integration is capable of delivering desirable performance.

show abstract

“…For the convenience of implementation, the above equation is transformed, and the reference voltage can be calculated by (11).…”

Section: Modified Ac Droop Control For Tpssmentioning

confidence: 99%

“…The impedance phase angle represents the weight of active power and reactive power. When θ = π 2 , equation (11) can be simplified to the conventional droop control.…”

Section: Modified Ac Droop Control For Tpssmentioning

confidence: 99%