RESUMO -Neste trabalho buscou-se uma tecnologia para a produção e aplicação de carvão ativado modificado com nanopartículas de prata e cobre com o objetivo de aumentar a remoção de flúor. O carvão ativado impregnado com metais foi produzido em um sistema piloto por excesso de solvente, seguido pela impregnação à vácuo. Os filtros gravitacionais contendo o meio poroso modificado foram avaliados em relação à eficiência na remoção de flúor. As amostras de carvão ativado modificadas produzidas foram caracterizadas texturalmente pelas medidas da área superficial especifica e de porosidade (SBET, volume e diâmetro de poros) e analise morfológica por microscopia eletrônica de varredura (MEV) e microscopia eletrônica de transmissão (MET). Em relação aos critérios de desempenho dos filtros com os meios porosos produzidos, os parâmetros analisados devem estar de acordo com os limites estabelecidos pela Portaria 2914/2011.
INTRODUÇÃOAlguns compostos podem alterar a qualidade da água que é destinada para o consumo humano e segundo a Organização Mundial da Saúde (OMS), um dos compostos que contaminam a água é o flúor, que em concentrações elevadas, acima de 1,5 mg L -1 , se torna prejudicial para a saúde humana. A contaminação das águas subterrâneas por flúor pode ocorrer por fatores naturais e ainda pode ser gerada pela atividade em indústrias de alumínio, onde é utilizado como fundente, e também no setor nuclear, onde todo o ciclo de enriquecimento de urânio é efetuado através do uso de compostos fluorados (Alvarinho e Martinelli, 2000).Durante o período de formação dos dentes, se for ingerido flúor em excesso, pode ocorrer uma intoxicação crônica e originar a fluorose dentária. Esta patologia se manifesta por meio de manchas esbranquiçadas e amarronzadas na superfície do esmalte dentário ou, até mesmo, por perdas em sua estrutura (Cardoso et al., 2001).Alguns processos para a remoção de flúor, como eletrocoagulação, eletroflotação e processos de separação por membranas tem custo e complexidade elevados (Chen et al., 2011;Deng et al., 2011). Uma técnica mais econômica e simples para remoção deste contaminante é a utilização de carvão ativado como adsorvente no tratamento da água, visto que este é um excelente adsorvente, com estrutura porosa altamente desenvolvida e com uma