Effect of the Heterogeneous Nucleation of the Primary α-Al Grain Via the Al-4Nb-0.5B Master Alloy in Al-Si Alloys With High Fe Contents

Abstract

Grain refinement in Al-Si alloys improves their mechanical properties. Research available in the literature shows the search for refinement efficiency through heterogeneous nucleation of the grain, involving the stoichiometric ratio between the alloy elements, the inoculant, and process parameters. In these surveys, there are divergences of information. However, this study does not aim to contradict this information but present an investigation made with the Al-4Nb-0.5B master alloy, where Nb >> B, used via sticks, with variations from 0 to 1 Wt.% of Nb and B according to a stoichiometric calculation added to the alloys cast with Al (7, 9, 12) Wt.% of Si and 1 Wt.% of Fe. The study also enabled an investigation into the morphology behavior of the β-Fe precipitates arising from Fe-critic in the alloy. Samples cast according to the TP1-2012 mold standard. The alloy microstructure analyzed was by energy-dispersive X-ray spectroscopy. The small addition of Nb-B can efficiently and significantly refine the size of the primary α-Al grain and has caused changes in the morphology of Fe-rich intermetallic, which became very refined spheroidised, suggesting an improvement in the mechanical properties of the material.