Thermal Behavior of Forest Biomass Wastes Produced During Combustion in a Boiler System

Abstract

It is known that during the biomass combustion in industrial systems the formation of residues containing ashes and residual carbon occurs. The content of the residues varies according to the efficiency and operating parameters of the combustion chambers. The characterization of these residues is an essential tool to identify their potential for energy reuse. The aim of this paper was to analyze the thermal behavior of the biomass and the residues yielded during the combustion process in a boiler system. For this purpose, forest biomass and ash samples have been analyzed in a laboratory and at four collection points of generation and treatment of the combustion residues (readler, hopper, scrubber, and decanter) inside the boiler of a power plant. The thermogravimetric analysis (TGA and DTA) have been carried out on all samples. Moreover, the ultimate analysis, the proximate analysis and the gross calorific value of all samples have been determined. Results show that the biomass burning efficiency in the boiler furnace was high, which was proven by the chemical composition and thermal degradation behavior of the residues collected in the readler. The scrubber’s light wastes presented chemical and energy properties (7180 kcal/kg, 75% fixed carbon content, 21% volatile content and 3.72% ash content), and thermal behavior similar to the ones found in the literature for eucalyptus charcoal. However, in order to reuse these combustion residues on reinjection or reheat systems, machine adjustments are essential to achieve burning efficiency and avoid operational problems. The decanter wastes did not show potential for energy reuse.

Waste to Energy: Investigation of Characteristics and Thermal Behaviors of Wastes

“…In order to design/select the appropriate thermal conversion technology, a deep understanding of the characteristics of wastes and their thermal behaviors are crucial [2]. To determine the characteristics of wastes for energy purposes, the proximate analysis was proven to be the most suitable technique [3].…”