Physical and physiological quality of seeds of Campo Grande Stylosanthes coated with different binder materials

Abstract

The binder materials used in seed coating provide adherence of the filler materials onto the seeds. Adequate concentrations of the binder promote good physical characteristics of coating while not impairing seed physiological characteristics. Thus, the objective of this study was to evaluate the type and the concentration of binder materials that allow the best physical and physiological characteristics in coated seeds of Campo Grande Stylosanthes. Seed coating was carried out in a coating pan, using sand as the filling material. The treatments consisted of 2 types of binders mixed in 3 ratios (PVA glue and gum arabic glue, diluted in water, 3:1, 2:1, and 1:1), and uncoated seeds as control. The coated seeds were evaluated for physical and physiological characteristics. The laboratory and greenhouse experiments were arranged in a completely randomized design. Results showed that at the different concentrations used this study, neither the PVA glue nor the gum arabic glue had any effect on the physiological quality of Campo Grande Stylosanthes seeds. However, PVA glue in the ratio of 2:1 provided the greatest surface area, maximum diameter, minimum diameter, and sphericity to coated seeds.

Coating seeds with fertilizer: A promising technique for forage crop seeds

“…Cascorez Extra (Henkel ® ), a polymer (polyvinyl acetate -PVA) adhesive, was used as the binder material. It was diluted in water in the ratio of 2:1 and heated to 70 °C for 12 h before starting the coating process (Baroni et al, 2020).…”