In this paper the comparative studies were conducted of the surface areas of nanophotonic contact lens and contact lens made from base material, measured by Nanoprobe Atomic Force Microscope. Nanoprobe atomic force microscopy (AFM) provides information on the size structure on nano scale level, the form of recorded structures (cavities), their distribution of the surface, and the total roughness of the scanned area. The atomic force microscope used in this study is a SPM-5200 of JEOL, Japan. AFM consists of a cantilever with a sharp tip (probe) at its end that is used to scan the specimen surface. Images of the specimen surface are created by measuring the deflection of the cantilever. The cantilever used in this study is produced by MikroMasch (Estonia) by trade name NCS18/Co-Cr. This AFM probe is silicon etched probe tip that has conical shape. It is coated with Co and Cr layers. Images of surface topography were obtained for each type of contact lenses. The base material of contact lens was made from PMMA and the nanophotonic contact lens was made of fullerene doped PMMA. Fullerenes were used because of their good transitive characteristics in ultraviolet, visible and near infrared light spectrums. Measurements were done at room temperature. Results of topography for both materials are presented and compared.
In this paper the authors present the results of surface characterisation of a lead telluride alloy conducted by atomic force microscopy and magnetic force microscopy. Relationship between surface morphology, in the range of several nanometres, and the magnetic properties allows precise determination of nanomagnetic particles size with their distribution within a scanned area. This method allows the characterisation of nanoparticles in dimensional and magnetic sense since the paramagnetic and diamagnetic range can be examined.