Lowering the operating temperature is a universal R&D challenge for the development of low-temperature (<600 °C) solid oxide fuel cells (SOFCs) that meet the demands of commercialization. Regarding the traditional electrolyte materials of SOFCs, bulk diffusion is the main ionic conduction mechanism, which is primarily affected by the bulk density and operating temperatures. In this study, we report a new mechanism for the Ce 0.9 Gd 0.1 O 2-δ (GDC) electrolyte based on a nanocrystalline structure with surface or grain boundary conduction, exhibiting an extremely high ionic conductivity of 0.37 S• cm −1 at 550 °C. The fuel cell with the nanocrystalline structure GDC electrolyte (0.5 mm in thickness) can deliver a remarkable peak power density of 591.8 mW•cm −2 at 550 °C, which is approximately 3.5 times higher than that for the cell with the GDC electrolyte densified at 1550 °C. An amorphous layer enriched by oxygen vacancies was found at the surface of the nano-GDC particles in the fuel cell test atmosphere, which was attributed to the ion conduction channel of the grain boundary diffusion. The ionic conduction at the interfaces between the particles was discovered to be the dominant conduction mechanism of the nanocrystalline structure GDC electrolyte. Oxygen ions and protons were determined to be the charge carriers in this interfacial conduction phenomenon, and the conduction of oxygen ions was dominant.

No abstract

No abstract

Herein, a poly(o-anisidine) (POA)–SiC composite epoxy coating was synthesized which demonstrates excellent corrosion protection of steel surfaces.

Volatile organic compounds, especially formaldehyde (HCHO), are considered to be great sources of contaminants in indoor air. However, design and preparation of safe, cost-affordable, and reusable materials for HCHO removal at ambient conditions are still remarkably challenging. Here, we have developed a kind of novel NaOH-embedded three-dimensional porous boron nitride (NaOH-3D BN) with high and hierarchical porosities, which exhibit excellent removal performance for HCHO. The as-prepared 3D BN is used as an adsorbent and catalytic support, while the embedded NaOH is applied as a catalyst, giving rise to catalytic transformation from high-toxic HCHO to less-toxic formate and methoxy salts at room temperature. Furthermore, their effective reusability has been confirmed. Given the high removal and reusability performance as well as no use of precious materials, the NaOH-3D BN is envisaged to be valuable practically for indoor air purification.