Bu çalışmada ağırlıkça %5 ile 50 arasında farklı oranlarda çinko içeren on adet ikili alüminyum-çinko alaşımı kokil kalıba döküm yöntemiyle üretildi. Üretilen alaşımların içyapıları ışık mikroskobunda incelendi. Alaşımların içyapısında bulunan fazları belirlemek için X-ışını kırınım (XRD) çalışmaları yapıldı. Elde edilen bulgular % 15 çinko oranına kadar alaşımların içyapısının alüminyumca zengin α fazından oluştuğunu ve alaşımdaki çinkonun bu faz içinde tamamen çözündüğünü göstermektedir. Çinko oranı % 15'i aştığında α fazının yanı sıra yapıda çinkoca zengin η fazının oluşmaya başladığı, %25'i aşması durumunda ise α fazının dendritik bir şekilde büyüdüğü görüldü. Alaşımların sertlik değerlerinin artan çinko oranı ile sürekli arttığı, çekme ve basma dayanımı değerlerinin ise %30 çinko oranına kadar arttığı bu orandan sonra azaldığı görüldü. Artan çinko oranı ile alaşımların içyapısında meydana gelen değişimler katılaşma davranışlarına, mekanik özelliklerinde meydana gelen değişimler ise yapısal değişimlere dayandırılarak irdelendi.
Bu çalışmanın amacı, Türkiye için 2007M1-2019M3 dönemleri arasında hataların normal dağılmadığı durumda güven faktörünün ekonomik büyüme üzerindeki etkisinin incelenmesidir. Bu kapsamda ekonomik güven ve büyüme arasındaki ilişki hataların normal dağılmadığı durumda daha güçlü sonuçlar veren RALS prosedürü ile araştırılmıştır. Serilerin durağanlığının incelenmesi aşamasında ADF ve RALS-ADF birim kök testlerinden ve uzun dönemli ilişkinin incelenmesi aşamasında EG ve RALS-EG eşbütünleşme testlerinden yararlanılmıştır. Birim kök testi sonuçları her iki serinin de birinci farklarında durağan olduğunu gösterirken eşbütünleşme analizi sonuçları; EG testine göre değişkenler arasında uzun dönemli bir ilişki olmadığını, RALS-EG testine göre değişkenler arasında uzun dönemli bir ilişkinin olduğunu göstermektedir. Uzun dönemde elde edilen ilişkinin büyüklüğü DOLS ve FMOLS yöntemleri ile araştırılmış ve ekonomik güvenin büyüme üzerinde yaklaşık %0,4'lük bir arttırıcı etki yarattığı sonucu elde edilmiştir. Buna sonuca göre Türkiye için ekonomik güveni arttırmaya yönelik uygulanacak politikaların ekonomik büyüme üzerinde pozitif etkileri olacaktır.
Microstructure of Al-30Zn-(0.01-2)B alloys Mechanical properties of Al-30Zn-(0.01-2)B alloys Grain refinement with boron Figure A. The change of tensile strength, elongation to fracture and specific strength of Al-30Zn-B alloys as a function of boron content Purpose: To investigate the effect of boron additions on the values of grain size, density, hardness, tensile strength, compressive strength, specific strength, and elongation to fractures of the Al-30Zn alloys. Theory and Methods:Al-30Zn-(0-2)B alloys were produced by permanent mold casting method. Structural properties of the produced alloys were determined by X-ray diffractometer, light and electron microscopy. The hardness and mechanical properties were determined by universal hardness and tensile testing methods. Results:The microstructures of the Al-30Zn alloy consists of α dendrites and the η phase surrounding these dendrites. The size of dendrites or grains decreases, but the number of them increases with boron addition. With increasing boron content, the hardness of Zn-30Al-(0-2)B alloys increase continuously, but compressive strength decrease. Tensile strength values of Zn-30Al-(0-2)B alloys increase with increasing boron additions, but above 0.06% B the trend reverses. The specific strength of the Al-30Zn alloy increased with boron additions. Conclusion:Boron additions up to 0.06% positively affect the mechanical properties of Al-30Zn alloys. It reduces the grain size, resulting in a significant increase in hardness and tensile strength of these alloys. When the boron content in the Al-30Zn alloys exceeds 0.06%, the volume fraction of the brittle phases around the dendrites increases. This leads to a decrease in the tensile strength of the alloy.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.