A key factor for successful design of bioactive complex, organic-inorganic hybrid biomaterials is the facilitation and control of adhesion at interfaces, as many current synthetic biomaterials are inert, lacking interfacial bio activity. In this regard, the development of a simple, unified way to bio functionalize diverse organic and inorganic materials toward biomineralization remains a critical challenge. In this report, a universal biomimetic mineralization route that can be applied to virtually any type and morphology of scaffold materials is provided to induce nucleation and growth of hydroxyapatite (HAp) crystals based on phase-transited lysozyme (PTL) coating. Surface-anchored abundant functional groups in the PTL enrich the interface with strongly bonded calcium ions, facilitating the formation of HAp crystals in simulated body fluid with the morphology and alignment being similar to that observed in natural HAp in mineralized tissues. By the adhesion of amyloid contained in the PTL, such protein assembly could readily integrate HAp on ceramics, metals, semiconductors, and synthetic polymers irrespective of their size and morphology, with robust bonding stability and corresponding ultralow wear extent under normal bone pressure. This strategy successfully improves the in vivo osteoconductivity of Ti-based implant, underpinning the expectation for such biomaterial in future biointerface and tissue engineering.

A total of 2,201 nonduplicate enterococcal isolates collected from 29 hospitals in 23 cities in China between 2004 and 2014 were screened for the oxazolidinone resistance gene optrA; 45 isolates (2.0%) were optrA positive with 11 OptrA variants identified. The positive rate of optrA increased from 0.4% to 3.9% during the 10-year surveillance period. Pulsed-field gel electrophoresis (PFGE) and multilocus sequence type (MLST) analysis revealed that 37 optrA-positive Enterococcus faecalis isolates clustered into 25 PFGE patterns and 21 sequence types, while 6 Enterococcus faecium isolates represented 6 PFGE patterns and 6 sequence types. The present study underscores the importance of routine and persistent monitoring of oxazolidinone resistance and optrA gene.

ObjectivesThe formation of biofilm around implants, which is induced by immediate bacterial colonization after installation, is the primary cause of post-operation infection. Initial surface modification is usually required to incorporate antibacterial agents on titanium (Ti) surfaces to inhibit biofilm formation. However, simple and effective priming methods are still lacking for the development of an initial functional layer as a base for subsequent coatings on titanium surfaces. The purpose of our work was to establish a novel initial layer on Ti surfaces using phase-transited lysozyme (PTL), on which multilayer coatings can incorporate silver nanoparticles (AgNP) using chitosan (CS) and hyaluronic acid (HA) via a layer-by-layer (LbL) self-assembly technique.MethodsIn this study, the surfaces of Ti substrates were primed by dipping into a mixture of lysozyme and tris(2-carboxyethyl)phosphine (TCEP) to obtain PTL-functionalized Ti substrates. The subsequent alternating coatings of HA and chitosan loaded with AgNP onto the precursor layer of PTL were carried out via LbL self-assembly to construct multilayer coatings on Ti substrates.ResultsThe results of SEM and XPS indicated that the necklace-like PTL and self-assembled multilayer were successfully immobilized on the Ti substrates. The multilayer coatings loaded with AgNP can kill planktonic and adherent bacteria to 100% during the first 4 days. The antibacterial efficacy of the samples against planktonic and adherent bacteria achieved 65%-90% after 14 days. The sustained release of Ag over 14 days can prevent bacterial invasion until mucosa healing. Although the AgNP-containing structure showed some cytotoxicity, the toxicity can be reduced by controlling the Ag release rate and concentration.ConclusionsThe PTL priming method provides a promising strategy for fabricating long-term antibacterial multilayer coatings on titanium surfaces via the LbL self-assembly technique, which is effective in preventing implant-associated infections in the early stage.

Although titanium (Ti) alloys have been widely used as implant materials, the bioinertness of pristine Ti impairs their bioactivity and early osseointegration. In the present work, we prepared TiO2 nanotubes (TNT) layer on the titanium (Ti) surface by anodic oxidation. The anodized surface was functionalized with human bone morphogenetic protein-2 coating to form the hBMP-2/TNT surface. The release behavior of hBMP-2 on the hBMP-2/TNT surface displayed a controlled and sustained pattern, compared to that on the hBMP-2/Ti surface, which showed a rapid release. In vitro cellular activity tests demonstrated that both TNT and hBMP-2/Ti surfaces, particularly the hBMP-2/TNT surface, enhanced adhesion, proliferation, and differentiation of osteoblast cells. Increased cell adhesion, improved cytoskeleton organization, and immunofluorescence staining of vinculin were observed on the modified surfaces. The TNT, hBMP-2/Ti, and hBMP-2/TNT surfaces, especially the hBMP-2/TNT surface, further displayed an upregulated gene expression of adhesion and osteogenic markers vinculin, collagen type 1, osteopontin, and osteocalcin, compared to the pristine Ti surface. In vivo experiments using a rat model demonstrated that the TNT and hBMP-2/Ti surfaces, in particular the hBMP-2/TNT surface, improved osseointegration and showed a superior bone bonding ability compared to Ti. Our study revealed a synergistic role played by TiO2 nanotubes nanotopography and hBMP-2 in promoting initial osteoblast adhesion, proliferation, differentiation, and osseointegration, thus suggesting a promising method for better modifying the implant surface.