Fruits and vegetables in the diet have been found in epidemiology studies to be protective against several chronic diseases. Epidemiological evidence suggests that flavonoid consumption in the diet is protective against heart disease. Phenols in 23 vegetables have been measured by extraction with and without acid hydrolysis to determine the percent of conjugated and free phenols. Phenols were measured colorimetrically using the Folin−Ciocalteu reagent with catechin as the standard. The extracts' antioxidant quality was assayed by the inhibition of lower density lipoprotein oxidation mediated by cupric ions. Vegetables had antioxidant quality comparable to that of pure flavonols and were superior to vitamin antioxidants. The phenol antioxidant index, measuring both the quantity and the quality of antioxidants present, was used to evaluate 23 vegetables. Isolated lower density lipoproteins from plasma spiked with two vegetable extracts were enriched with phenol antioxidants and showed decreased oxidizability. The average per capita consumption of vegetable phenols in the United States was estimated to be 218 mg/day of catechin equivalents. This is 3 times higher than the recommended intake of vitamin antioxidants. Keywords: Phenols; antioxidants; vegetables; lipoprotein oxidation

Recent years have witnessed the rise of graphene and its applications in various electronic devices. Specifically, featuring excellent flexibility, transparency, conductivity, and mechanical robustness, graphene has emerged as a versatile material for flexible electronics. In the past decade, facilitated by various laser processing technologies, including the laser‐treatment‐induced photoreduction of graphene oxides, flexible patterning, hierarchical structuring, heteroatom doping, controllable thinning, etching, and shock of graphene, along with laser‐induced graphene on polyimide, graphene has found broad applications in a wide range of electronic devices, such as power generators, supercapacitors, optoelectronic devices, sensors, and actuators. Here, the recent advancements in the laser fabrication of graphene‐based flexible electronic devices are comprehensively summarized. The various laser fabrication technologies that have been employed for the preparation, processing, and modification of graphene and its derivatives are reviewed. A thorough overview of typical laser‐enabled flexible electronic devices that are based on various graphene sources is presented. With the rapid progress that has been made in the research on graphene preparation methodologies and laser micronanofabrication technologies, graphene‐based electronics may soon undergo fast development.

Three-fold symmetrically distributed GaN nanowire (NW) arrays have been epitaxially grown on GaN/sapphire substrates. The GaN NW possesses a triangular cross section enclosed by (0001), (2112), and (2112) planes, and the angle between the GaN NW and the substrate surface is approximately 62 degrees . The GaN NW arrays produce negative output voltage pulses when scanned by a conductive atomic force microscope in contact mode. The average of piezoelectric output voltage was about -20 mV, while 5-10% of the NWs had piezoelectric output voltages exceeding -(0.15-0.35) V. The GaN NW arrays are highly stable and highly tolerate to moisture in the atmosphere. The GaN NW arrays demonstrate an outstanding potential to be utilized for piezoelectric energy generation with a performance probably better than that of ZnO NWs.