Large-area conducting transparent conducting electrodes (TCEs) were prepared by a fast, scalable, and low-cost spray deposition of copper nanowire (CuNW) dispersions. Thin, long, and pure copper nanowires were obtained via the seed-mediated growth in an organic solvent-based synthesis. The mean length and diameter of nanowires are, respectively, 37.7 μm and 46 nm, corresponding to a high-mean-aspect ratio of 790. These wires were spray-deposited onto a glass substrate to form a nanowire conducting network which function as a TCE. CuNW TCEs exhibit high-transparency and high-conductivity since their relatively long lengths are advantageous in lowering in the sheet resistance. For example, a 2 × 2 cm(2) transparent nanowire electrode exhibits transmittance of T = 90% with a sheet resistance as low as 52.7 Ω sq(-1). Large-area sizes (>50 cm(2)) of CuNW TCEs were also prepared by the spray coating method and assembled as resistive touch screens that can be integrated with a variety of devices, including LED lighting array, a computer, electric motors, and audio electronic devices, showing the capability to make diverse sizes and functionalities of CuNW TCEs by the reported method.

Metal nanowires are promising for their applications including electrical connectors, transparent conductive electrodes and conductive additives, but the use of metal nanowires as photothermal agents to convert light to heat has yet to be reported. Here we synthesized dispersible polyethylene glycol-coated (PEGylated) copper nanowires (CuNWs) and showed for the first time that PEGylated CuNWs were able to convert near-infrared (NIR, 808 nm) light into heat at a photothermal efficiency of 12.5%. The PEGylated CuNWs exhibited good reusability and enabled rapid temperature rise to >50 °C in 6 min by NIR irradiation. The PEGylated CuNWs were flexible and intertwined around the cancer cells, which, upon NIR irradiation, allowed for direct heat transmission to cells and effectively triggered cancer cell ablation in vitro. Intratumoral injection of PEGylated CuNWs into colon tumor-bearing mice and ensuing NIR irradiation for 6 min significantly raised the local temperature to >50 °C, induced necrosis, and suppressed tumor growth. Compared with other NIR light absorbing noble metal-based nanomaterials, PEGylated CuNWs are relatively easy to synthesize in both laboratory and large scales using the low cost copper. This study demonstrated the potential of PEGylated CuNWs as a new cost-effective photothermal agent, and paved a new avenue to using CuNWs for cancer therapy.

We present here the passivation mechanism and the chemistry of an (NH4)2Sx-treated Mg-doped GaN surface examined by using x-ray photoelectron spectroscopy. The native oxide on the GaN surface can be removed by the (NH4)2Sx treatment process. The S atoms not only bond as elemental sulfur and disulfides, but occupy nitrogen-related vacancies.

To investigate the possibility of preparing a nonalloyed ohmic contact to n-type GaN, the effects of GaN surface treatments on the metal/GaN interface were studied using x-ray photoelectron spectroscopy. A specific contact resistance of 5.0×10−5 Ω cm2 for the Ti/Al nonalloyed ohmic contacts to (NH4)2Sx-treated n-type GaN can be obtained. The nonalloyed ohmic contact formation would be impeded by the native oxide and the hydroxyl induced from the surface treatment of chemical solutions.

The effect of the alkyl side chain of the ubiquinone molecule on the electron-transfer activity of ubiquinone in mitochondrial succinate-cytochrome c reductase is studied by using synthetic ubiquinone derivatives that possess the basic ubiquinone structure of 2,3-dimethoxy-5-methyl-1,4-benzoquinone with different alkyl side chains at the 6-position. The alkyl side chains vary in chain length, degree of saturation, and location of double bonds. When a ubiquinone derivative is used as an electron acceptor for succinate-ubiquinone reductase, an alkyl side chain of six carbons is needed to obtain the maximum activity. However, when it serves as an electron donor for ubiquinol-cytochrome c reductase or as a mediator in succinate-cytochrome c reductase, an alkyl side chain of 10 carbons gives maximal efficiency. Introduction of one or two isolated double bonds into the alkyl side chain of the ubiquinone molecule has little effect on electron-transfer activity. However, a conjugated double bond system in the alkyl side chain drastically reduces electron-transfer efficiency. The effect of the conjugated double bond system on the electron-transferring efficiency of ubiquinone depends on its location in the alkyl side chain. When location is far from the benzoquinone ring, the effect is minimal. These observations together with the results obtained from photoaffinity-labeling studies lead us to conclude that flexibility in the portion of the alkyl side chain immediately adjacent to the benzoquinone ring is required for the electron-transfer activity of ubiquinone.