Efforts aimed at large-scale integration of nanoelectronic devices that exploit the superior electronic and mechanical properties of single-walled carbon nanotubes (SWCNTs) remain limited by the difficulties associated with manipulation and packaging of individual SWNTs. Alternative approaches based on ultrathin carbon nanotube networks (CNNs) have enjoyed success of late with the realization of several scalable device applications. However, precise control over the network electronic transport is challenging due to (i) an often uncontrollable interplay between network coverage and its detailed topology and (ii) the inherent electrical heterogeneity of the constituent SWNTs. In this article, we use template-assisted fluidic assembly of SWCNT networks to explore the effect of geometric confinement on the network topology. Heterogeneous SWCNT networks dip-coated onto submicrometer wide ultrathin polymer channels become increasingly aligned with decreasing channel width and thickness. Experimental-scale coarse-grained computations of interacting SWCNTs show that the effect is a reflection of a topology that is no longer dependent on the network density, which in turn emerges as a robust knob that can induce semiconductor-to-metallic transitions in the network response. Our study demonstrates the effectiveness of directed assembly on channels with varying degrees of confinement as a simple tool to tailor the conductance of the otherwise heterogeneous network, opening up the possibility of robust large-scale CNN-based devices.

We demonstrate a simple and efficient one-step procedure for synthesizing a solid state polypyrrole (PPy) thin film for supercapacitor applications using alternating current impedance spectroscopy. By controlling the frequency and amplitude we were able to create unique PPy nano/microstructures with a particular morphology of the loop. Our PPy micro/nanosphere shows extremely high capacitance of 568 F/g, which is close to the theoretical value of 620 F/g and 20-100% higher than that of other reported PPy electrodes. Most of all, this material presents high capacitance and significantly improved electrochemical stability without pulverization of its structure, demonstrating 77% retention of the capacitance value even after 10 000 charge/discharge cycles. These results are a consequence of the larger surface area and adequate porosity generated due to the balance between the nano/micro PPy loops. This created porous structure also allows the favored penetration of electrolyte and high ion mobility within the polymer and prevents the mechanical failure of the physical structure during volume variation associated with the insertion/deinsertion of ions upon cycling.

The vascular endothelial cells are the inner layers of blood vessels. It regulates the function of blood vessels and proliferation of vascular smooth muscle cells. Poly(lactide-co-glycolic acid) (PLGA) is a biodegradable synthetic polymer with a well-controlled degradation rate and an acceptable mechanical strength. It can be easily fabricated into many shapes. Silk consists of 18 amino acids. It found important for attaching cells cultured in vitro, and maintaining cell functions. In this study, we fabricated silk/PLGA biomaterial hybrid films of 0, 10, 20, 40 and 80 wt% silk. We performed MTT, SEM, ELISA, and immunocytochemistry analyses. We confirmed the adhesion and the proliferation of HAECs on silk/PLGA according to the content of silk, and 40 wt% silk/PLGA hybrid films have superior adhesion and proliferation properties. These results demonstrate that silk/PLGA hybrid films provide suitable surfaces for HAECs, and there is the effect of silk on cell growth and proliferation.

No abstract

To widen the applications, cationic cellulose beads were synthesized by adding glycidyltrimethylammonium chloride (GTAC) to cellulose fibers dissolved in a mixture of tetraethylammonium hydroxide and urea at room temperature for cationic modification, and dropping the cationic cellulose solution into an acetic acid solution. Herein, the effects of the added GTAC amount on the properties of cationic cellulose soultion and cellulose beads were investigated. It was observed that increasing the amount of GTAC increased the viscosity and surface tension of the cationically modified cellulose solution and increased the particle size of the cellulose beads. Furthermore, the zeta potential of the cellulose beads can be controlled by modifying the GTAC amount.