Graphene is a two-dimensional material with extremely favorable chemical sensor properties. Conventional nanolithography typically leaves a resist residue on the graphene surface, whose impact on the sensor characteristics has not yet been determined. Here we show that the contamination layer chemically dopes the graphene, enhances carrier scattering, and acts as an absorbent layer that concentrates analyte molecules at the graphene surface, thereby enhancing the sensor response. We demonstrate a cleaning process that verifiably removes the contamination on the device structure and allows the intrinsic chemical responses of the graphene monolayer to be measured. These intrinsic responses are surprisingly small, even upon exposure to strong analytes such as ammonia vapor.

We demonstrate that vertical silicon nanowires take on a surprising variety of colors covering the entire visible spectrum, in marked contrast to the gray color of bulk silicon. This effect is readily observable by bright-field microscopy, or even to the naked eye. The reflection spectra of the nanowires each show a dip whose position depends on the nanowire radii. We compare the experimental data to the results of finite difference time domain simulations to elucidate the physical mechanisms behind the phenomena we observe. The nanowires are fabricated as arrays, but the vivid colors arise not from scattering or diffractive effects of the array, but from the guided mode properties of the individual nanowires. Each nanowire can thus define its own color, allowing for complex spatial patterning. We anticipate that the color filter effect we demonstrate could be employed in nanoscale image sensor devices.

Nanowires have unique optical properties and are considered as important building blocks for energy harvesting applications such as solar cells. However, due to their large surface-to-volume ratios, the recombination of charge carriers through surface states reduces the carrier diffusion lengths in nanowires a few orders of magnitude, often resulting in the low efficiency (a few percent or less) of nanowire-based solar cells. Reducing the recombination by surface passivation is crucial for the realization of high-performance nanosized optoelectronic devices but remains largely unexplored. Here we show that a thin layer of amorphous silicon (a-Si) coated on a single-crystalline silicon nanowire, forming a core-shell structure in situ in the vapor-liquid-solid process, reduces the surface recombination nearly 2 orders of magnitude. Under illumination of modulated light, we measure a greater than 90-fold improvement in the photosensitivity of individual core-shell nanowires, compared to regular nanowires without shell. Simulations of the optical absorption of the nanowires indicate that the strong absorption of the a-Si shell contributes to this effect, but we conclude that the effect is mainly due to the enhanced carrier lifetime by surface passivation.

The organic dye filters of conventional color image sensors achieve the red/green/blue response needed for color imaging, but have disadvantages related to durability, low absorption coefficient, and fabrication complexity. Here, we report a new paradigm for color imaging based on all-silicon nanowire devices and no filters. We fabricate pixels consisting of vertical silicon nanowires with integrated photodetectors, demonstrate that their spectral sensitivities are governed by nanowire radius, and perform color imaging. Our approach is conceptually different from filter-based methods, as absorbed light is converted to photocurrent, ultimately presenting the opportunity for very high photon efficiency.