The high theoretical capacity and low discharge potential of silicon have attracted much attention on Si-based anodes. Herein, hollow porous SiO2 nanocubes have been prepared via a two-step hard-template process and evaluated as electrode materials for lithium-ion batteries. The hollow porous SiO2 nanocubes exhibited a reversible capacity of 919 mAhg−1 over 30 cycles. The reasonable property could be attributed to the unique hollow nanostructure with large volume interior and numerous crevices in the shell, which could accommodate the volume change and alleviate the structural strain during Li ions' insertion and extraction, as well as allow rapid access of Li ions during charge/discharge cycling. It is found that the formation of irreversible or reversible lithium silicates in the anodes determines the capacity of a deep-cycle battery, fast transportation of Li ions in hollow porous SiO2 nanocubes is beneficial to the formation of Li2O and Si, contributing to the high reversible capacity.
Co3O4 nanoparticles have been prepared by a facile strategy, which involves the thermal decomposition of nanoparticles of cobalt-based Prussian blue analogues at different temperatures. The nanoparticles prepared at 450, 550, 650, 750, and 850 °C exhibited a high discharge capacity of 800, 970, 828, 854, and 651 mAhg–1, respectively, after 30 cycles at a current density of 50 mAg–1. The nanocages produced at 550 °C show the highest lithium storage capacity. It is found that the nanocages display nanosize grains, hollow structure, a porous shell, and large specific surface area. At the temperature higher than 650 °C, the samples with larger grains, better crystallinity, and lower specific surface area can be obtained. It is found that the size, crystallinity, and morphology of nanoparticles have different effects on electrochemical performance. Better crystallinity is able to enhance the initial discharge capacity, while porous structure can reduce the irreversible loss. Therefore, the optimal size, crystallinity, and cage morphology are suggested to be responsible for the improved lithium storage capacity of the sample prepared at 550 °C. The as-prepared Co3O4 nanoparticles also have a potential application as anode material for Li-ion batteries due to their simple synthesis method and large capacity.
Over the past two decades, metal-organic frameworks (MOFs), a type of porous material, have aroused great interest as precursors or templates for the derivation of metal oxides and composites for the next generation of electrochemical energy storage applications owing to their high specific surface areas, controllable structures, and adjustable pore sizes. The electrode materials, which affect the performance in practical applications, are pivotal components of batteries and supercapacitors. Metal oxide composites derived from metal-organic frameworks possessing high reversible capacity and superior rate and cycle performance are excellent electrode materials. In this Review, potential applications for MOF-derived metal oxide composites for lithium-ion batteries, sodium-ion batteries, lithium-oxygen batteries, and supercapacitors are studied and summarized. Finally, the challenges and opportunities for future research on MOF-derived metal oxide composites are proposed on the basis of academic knowledge from the reported literature as well as from experimental experience.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.