Este trabajo presenta los resultados de la aproximación a un modelo matemático de valoración de la calidad de aire que se realizó para estimar y validar la aceptación del valor económico como pago para mantener una calidad de aire que permita un adecuado cuidado de la salud pública en el área metropolitana de Bucaramanga. Para ello, se recurrió inicialmente a recolección selectiva de datos meteorológicos del Instituto de Hidrología, Meteorología y Estudios Ambientales (IDEAM), también se solicitó datos de calidad de aire de la Corporación Autónoma Regional para la Defensa de la Meseta de Bucaramanga (CDMB), además se colectó datos del Observatorio de Salud Pública de Bucaramanga, quienes facilitaron los registros EPOC del año 2012. Para efectos de la valoración económica se realizaron encuestas que fueron aplicadas en el mes de mayo del año en curso en el Área metropolitana de Bucaramanga y las ecuaciones del Método denominado Valoración Contingente (MVC). Los resultados indican que los ciudadanos podrían pagar un valor per cápita para mantener la calidad de aire de la ciudad y éste valor tiene una probabilidad alta de ser el adecuado de acuerdo al método contingente.
El hombre en sus distintos procesos productivos ha generado modificaciones al ambiente. La minería metalúrgica no se exime de esto, ya que muchos de los residuos producidos, en especial los efluentes, no cuentan con ningún tipo de tratamiento antes de ser vertidos. El objetivo de la investigación fue evaluar la eficiencia de remoción del Cu, Fe y Pb del efluente minero-metalúrgicos a escala de laboratorio mediante la aplicación de un filtro bioadsorbente con fibras lignocelulósicas (cáscaras de plátano, coco y naranja). Se diseñó 10 filtros compuestos por cáscaras de plátano, coco y naranja, en diferentes proporciones (siendo 100 gr el 100 %), según lo establecido mediante el Diseño de mezclas Simplex Lattice, con tres metales a remover (Cu, Fe y Pb). Se trabajó a un pH de 7.3, tiempo de contacto de 3 horas y tamaño de partícula de 0.250 mm, en todos los tratamientos. Los resultados muestran que para el Cu el mejor tratamiento fue (T2), con 100 gr de cáscaras de coco (96.36%); para el hierro el tratamiento seis (T6) compuesto por coco-naranja (50 gr de cada uno) con una eficiencia de (92.05%); y el plomo presentó una mayor remoción del 97.34% con los tratamientos tres (T3) y seis (T6) compuesto por 100 gr de naranja y coco-naranja (50 gr de cada uno), respectivamente. Los datos se ajustaron mejor al modelo de regresión cúbica especial, siendo para el cobre el valor P de 0.000305 y el coeficiente de determinación R2 0.790156. Para el hierro, el valor P 0.000000 y coeficiente de determinación R2 0.930029. El valor P del plomo fue de 0.000034 y el coeficiente de determinación R2 0.719867. Considerando que el valor de R2, es mejor mientras más se acerca a 1, y que (p<0,05) es significativo.
A pilot – level system of the termal pirolisis process was developed to obtain biocarbon with minimal emission of polluting gases, from the solid waste generated in the pruning gases, from the solid waste generated in the pruning and gardening of the university campus of the University of Santander in Bucaramanga Colombia. The pilot – level system has a processing capacity of 50 kilograms of prunning and garden waste, and the operating variables ser 500ªC of temperatura and 120 minutes of processing. The prunnig and gardenning samples were divided into two. The first simple consisted of Woody-type residues (pruningn), the second simple consisted of grass and leat litter remains. The biocarbons obtaneid were characerized physicochemically, by close analysis and last chemical analysis (CHN). For its part, the morphology of the biocarbons and the microchemical anlysis of the ash particles that they possessed was carried out by means of scanning electron microscopy coupled with chemical microanalysis by means of X-ray dispersive energy spectroscopy. The biocarbon obtained can be used as soil additions to increase the forests that surrond the University campus.
Este trabajo propone como uno de sus objetivos la disminución de pasivos ambientales mineros PAM a través de la obtención, a nivel de laboratorio, de espumas de vidrio. Estas espumas se obtienen a partir de una mezcla de polvo de vidrio, carburo de silicio como agente espumante y residuos mineros almacenados a la intemperie que se presentan en zonas cercanas al municipio de Vetas, Santander. En este trabajo se realizó un muestreo pormenorizado de dichos residuos mineros y luego se procedió a realizar una caracterización química y mineralógica mediante FRX y SEM, física y granulometría. Posteriormente los residuos con contenido alto de SiO2, se mezclaron con vidrio reciclado el cual es tradicionalmente la principal materia prima para la elaboración de espumas de vidrio, dicha mezcla se sometió a pruebas de DSC y TGA para obtener las temperaturas adecuadas para llevar a cabo el tratamiento de sinterización. Las temperaturas empleadas para la sinterización fueron 750, 950 y 1000 °C, a una velocidad de calentamiento de 5°C/min y un tiempo de sostenimiento de 30 minutos dentro de un horno mufla, en una atmósfera en presencia de oxígeno y dejando enfriar dentro del horno. Obteniendo como resultado una espuma de vidrio a 950°C con las siguientes propiedades: densidad aparente 0,292 g/cm3, porcentaje de porosidad 58% y resistencia a la compresión de 8,96 MPa. Finalmente se demostró la posibilidad de obtener espuma de vidrio a un bajo costo, empleando residuos mineros.
El tratamiento de drenajes ácidos de mina-DAM es necesario para mitigar los impactos ambientales generados en las industrias mineras, debido a que, un inadecuado e ineficiente sistema de tratamiento puede potencializar un riesgo tanto para la salud humana como para el medio ambiente. Con la finalidad de impulsar un método innovador y económico para el tratamiento de los DAM direccionado a la neutralización de su pH, se construyeron siete filtros utilizando polvo de acería y otros materiales, siguiendo la metodología de Design Thinking. Los resultados de la investigación mostraron una neutralización del pH de una solución ácida de HCl filtrada durante veinte días en los prototipos construidos. El resultado principal del estudio demostró que los filtros construidos con polvo de acería pueden neutralizar el pH de los drenajes ácidos de mina, consecuencia de la presencia de material calcáreo.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.