Gold is one of the most selective catalysts for the electrochemical reduction of CO2 (CO2RR) to CO. However, the concomitant hydrogen evolution reaction (HER) remains unavoidable under aqueous conditions. In this work, a rotating ring disk electrode (RRDE) setup has been developed to study quantitatively the role of mass transport in the competition between these two reactions on the Au surface in 0.1 M bicarbonate electrolyte. Interestingly, while the faradaic selectivity for CO formation was found to increase with enhanced mass transport (from 67% to 83%), this effect is not due to an enhancement of the CO2RR rate. Remarkably, the inhibition of the competing HER from water reduction with increasing disk rotation rate is responsible for the enhanced CO2RR selectivity. This can be explained by the observation that, on the Au electrode, water reduction improves with more alkaline pH. As a result, the decrease in the local alkalinity near the electrode surface with enhanced mass transport suppresses HER due to the water reduction. Our study shows that controlling the local pH by mass transport conditions can tune the HER rate, in turn regulating the CO2RR and HER competition in the general operating potential window for CO2RR (−0.4 to −1 V vs RHE).

Hydrogen production from renewable resources and its reconversion into electricity are two important pillars toward a more sustainable energy use. The efficiency and viability of these technologies heavily rely on active and stable electrocatalysts. Basic research to develop superior electrocatalysts is commonly performed in conventional electrochemical setups such as a rotating disk electrode (RDE) configuration or H-type electrochemical cells. These experiments are easy to set up; however, there is a large gap to real electrochemical conversion devices such as fuel cells or electrolyzers. To close this gap, gas diffusion electrode (GDE) setups were recently presented as a straightforward technique for testing fuel cell catalysts under more realistic conditions. Here, we demonstrate for the first time a GDE setup for measuring the oxygen evolution reaction (OER) of catalysts for proton exchange membrane water electrolyzers (PEMWEs). Using a commercially available benchmark IrO 2 catalyst deposited on a carbon gas diffusion layer (GDL), it is shown that key parameters such as the OER mass activity, the activation energy, and even reasonable estimates of the exchange current density can be extracted in a realistic range of catalyst loadings for PEMWEs. It is furthermore shown that the carbon-based GDL is not only suitable for activity determination but also short-term stability testing. Alternatively, the GDL can be replaced by Ti-based porous transport layers (PTLs) typically used in commercial PEMWEs. Here a simple preparation is shown involving the hot-pressing of a Nafion membrane onto a drop-cast glycerol-based ink on a Ti-PTL.

Active,s elective and stable catalysts are imperative for sustainable energy conversion, and engineering materials with such properties are highly desired. High-entropya lloys (HEAs) offer av ast compositional space for tuning such properties.T oo vast, however,t ot raverse without the proper tools.H ere,w er eport the use of Bayesiano ptimization on am odel based on density functional theory (DFT) to predict the most active compositions for the electrochemical oxygen reduction reaction (ORR) with the least possible number of sampled compositions for the two HEAs Ag-Ir-Pd-Pt-Ru and Ir-Pd-Pt-Rh-Ru. The discoveredo ptima are then scrutinized with DFT and subjected to experimental validation where optimal catalytic activities are verified for Ag-Pd, Ir-Pt, and Pd-Ru binary alloys.This study offers insight into the number of experiments needed for optimizing the vast compositional space of multimetallic alloys whichhas been determined to be on the order of 50 for ORR on these HEAs.

Cathodic corrosion is a phenomenon in which negatively polarized metal electrodes are degraded by cathodic etching and nanoparticle formation. Though these changes are dramatic and sometimes even visible by eye, the exact mechanisms underlying cathodic corrosion are still unclear. This work aims to improve the understanding of cathodic corrosion by studying its onset on rhodium and gold electrodes, which are subjected to various constant cathodic potentials in 10 M NaOH. After this polarization, the electrodes are studied using cyclic voltammetry and scanning electron microscopy, allowing a corrosion onset potential of -1.3 V vs. NHE for rhodium and -1.6 V vs. NHE for gold to be defined. The mildness of the potentials on both metals suggests that cathodic corrosion is less extreme and more ubiquitous than expected. Furthermore, we are able to observe well-defined rectangular etch pits on rhodium. Combined with rhodium cyclic voltammetry, this indicates a strong preference for forming (100) sites during corrosion. In contrast, a (111) preference is indicated on gold by voltammetry and the presence of well-oriented quasi-octahedral nanoparticles. This different etching behavior is suggested to be caused by preferential adsorption of sodium ions to surface defects, as is confirmed by density functional theory calculations.

Active,s elective and stable catalysts are imperative for sustainable energy conversion, and engineering materials with such properties are highly desired. High-entropya lloys (HEAs) offer av ast compositional space for tuning such properties.T oo vast, however,t ot raverse without the proper tools.H ere,w er eport the use of Bayesiano ptimization on am odel based on density functional theory (DFT) to predict the most active compositions for the electrochemical oxygen reduction reaction (ORR) with the least possible number of sampled compositions for the two HEAs Ag-Ir-Pd-Pt-Ru and Ir-Pd-Pt-Rh-Ru. The discoveredo ptima are then scrutinized with DFT and subjected to experimental validation where optimal catalytic activities are verified for Ag-Pd, Ir-Pt, and Pd-Ru binary alloys.This study offers insight into the number of experiments needed for optimizing the vast compositional space of multimetallic alloys whichhas been determined to be on the order of 50 for ORR on these HEAs.