Active Vibration Control (AVC) using smart structure is used to reduce the vibration of a system by automatic modification of the system structural response. AVC is widely used, because of its wide and broad frequency response range, low additional mass, high adaptability and good efficiency. A lot of research has been done on Finite Element (FE) models for AVC based on Euler Bernoulli Beam Theory (EBT). In the present work Timoshenko Beam Theory (TBT) is used to model a smart cantilever beam with surface mounted sensors / actuators. A Periodic Output Feedback (POF) Controller has been designed and applied to control the first three modes of vibration of a flexible smart cantilever beam. The difficulties encountered in the usage of surface mounted piezoelectric patches in practical situations can be overcome by the use of embedded shear sensors / actuators. A mathematical model of a smart cantilever beam with embedded shear sensors and actuators is developed. A POF Controller has been designed and applied to control of vibration of a flexible smart cantilever beam and effect of actuator location on the performance of the controller is investigated. The mathematical modeling and control of a Multiple Input multiple Output (MIMO) systems with two sensors and two actuators have also been considered.
In the present paper, an analytical model of a flexible beam fixed at an end with embedded shear sensors and actuators is developed. The smart cantilever beam model is evolved using a piezoelectric sandwich beam element, which accommodates sensor and actuator embedded at distinct locations and a regular sandwiched beam element, having rigid foam at the core. A FE model of a piezoelectric sandwich beam is evolved using laminated beam theory in MATLAB®. Each layer behaves as a Timoshenko beam and the cross-section of the beam remains plane and rotates about the neutral axis of the beam, but it does not remain normal to the deformed longitudinal axis. Keeping the sensor and actuator location fixed in a MIMO system, state space models of the smart cantilever beam is obtained. The proper selection of control strategy is very crucial in order to obtain the better control. In this paper a DSM controller designed to control the first three modes of vibration of the smart cantilever beam and their performances are represented on the basis of control signal input, sensor output and sliding functions. It is found that DSM controller provides superior control than other conventional controllers and also MROF DSM controller is much better than SISO DSM controller.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.