No abstract

Degrapol ® and PLGA electrospun fiber fleeces were characterized with regard to fiber diameter, alignment, mechanical properties as well as scaffold porosity. The study showed that electrospinning parameters affect fiber diameter and alignment in an inverse relation: fiber diameter was increased with increased flow rate, with decrease in working distance and collector velocity, whereas fiber alignment increased with the working distance and collector velocity but decreased with increased flow rate. When Degrapol ® or PLGA-polymers were co-spun with increasing ratios of a water-soluble polymer that was subsequently removed; fibrous scaffolds with increased porosities were obtained. Mechanical properties correlated with fiber alignment rather than fiber diameter as aligned fiber scaffolds demonstrated strong mechanical anisotropy. For co-spun fibers the Young's modulus correlated inversely with the amount of co-spun polymer. Cell proliferation was independent of the porosity of the scaffold, but different between the two polymers. Furthermore, fibrous scaffolds with different porosities were analyzed for cell infiltration suggesting that cell infiltration was enhanced with increased porosity and increasing time. These experiments indicate that 3D-fiber fleeces can be produced with controlled properties, being prerequisites for successful scaffolds in tissue engineering applications.

Titanium implants are most commonly used for bone augmentation and replacement due to their favorable osseointegration properties. Here, hyperhydrophilic sand-blasted and acid-etched (SBA) titanium surfaces were produced by alkali treatment and their responses to partially heparinized whole human blood were analyzed. Blood clot formation, platelet activation and activation of the complement system was analyzed revealing that exposure time between blood and the material surface is crucial as increasing exposure time results in higher amount of activated platelets, more blood clots formed and stronger complement activation. In contrast, the number of macrophages/monocytes found on alkali-treated surfaces was signifi cantly reduced as compared to untreated SBA Ti surfaces. Interestingly, when comparing untreated to modifi ed SBA Ti surfaces very different blood clots formed on their surfaces. On untreated Ti surfaces blood clots remain thin (below 15 mm), patchy and non-structured lacking large fi brin fi ber networks whereas blood clots on differentiated surfaces assemble in an organized and layered architecture of more than 30 mm thickness. Close to the material surface most nucleated cells adhere, above large amounts of non-nucleated platelets remain entrapped within a dense fi brin fi ber network providing a continuous cover of the entire surface. These fi ndings might indicate that, combined with fi ndings of previous in vivo studies demonstrating that alkali-treated SBA Ti surfaces perform better in terms of osseointegration, a continuous and structured layer of blood components on the blood-facing surface supports later tissue integration of an endosseous implant.

Various synthetic and natural biomaterials have been used for regeneration of tissues and hollow organs. However, clinical outcome of reconstructive procedures remained challenging due to the lack of appropriate scaffold materials, supporting the needs of various cell types and providing a barrier function required in hollow organs. To address these problems, we have developed a bilayered hybrid scaffold comprising unique traits of polymeric microfibers and naturally derived acellular matrices and tested its potential for hollow organ regeneration in a rat bladder model. Hybrid scaffolds were fabricated by electrospinning of PLGA microfibers directly onto the abluminal surface of a bladder acellular matrix. Stability of this bilayered construct was established using modified spinning technique. The resulting 3-dimensional framework provided good support for growth, attachment and proliferation of primary bladder smooth muscle cells. Histological analysis in vivo at 4 and 8 weeks post implantation, revealed regeneration of bladder tissue structures consisting of urothelium, smooth muscle and collagen rich layers infiltrated with host cells and micro vessels. Furthermore, hybrid scaffolds maintained normal bladder capacity, whereas BAM recipients showed a significant distension of the bladder. These results demonstrate that this adaptable hybrid scaffold supports bladder regeneration and holds potential for engineering of bladder and other hollow organs. AbstractVarious synthetic and natural biomaterials have been used for regeneration of tissues and hollow organs. However, clinical outcome of reconstructive procedures remained challenging due to the lack of appropriate scaffold materials, supporting the needs of various cell types and providing a barrier function required in hollow-organs. To address these problems, we have developed a bilayered hybrid scaffold comprising unique traits of polymeric microfibers and naturally derived acellular matrices and tested its potential for hollow-organ regeneration in a rat bladder model. BAM-recipients showed a significant distension of the bladder. These results demonstrate that this adaptable hybrid scaffold supports bladder regeneration and holds potential for engineering of bladder and other hollow-organs.

The fate of mesenchymal stem cells (MSCs) in the perivascular niche, as well as factors controlling their fate, is poorly understood. Here, we study MSCs in the perivascular microenvironment of endothelial capillaries by modifying a synthetic 3D biomimetic poly(ethylene glycol) (PEG)-hydrogel system We show that MSCs together with endothelial cells form micro-capillary networks specifically in soft PEG hydrogels. Transcriptome analysis of human MSCs isolated from engineered capillaries shows a prominent switch in extracellular matrix (ECM) production. We demonstrate that the ECM phenotypic switch of MSCs can be recapitulated in the absence of endothelial cells by functionalizing PEG hydrogels with the Notch-activator Jagged1. Moreover, transient culture of MSCs in Notch-inducing microenvironments reveals the reversibility of this ECM switch. These findings provide insight into the perivascular commitment of MSCs by use of engineered niche-mimicking synthetic hydrogels.