RESUMOAs indústrias de base florestal apresentam baixo rendimento e geram grande quantidade de resíduos, especialmente as indústrias de transformação primária como, por exemplo, as serrarias. No Brasil, estão sendo criadas iniciativas para aliar a utilização desses resíduos à produção de celulose. Dentro deste propósito, o presente trabalho teve como objetivos avaliar o rendimento de uma serraria de médio porte localizada no município de Rio Grande, RS, e promover análises físico-químicas dos resíduos gerados na etapa de desdobro. Foram utilizadas 20 toras de Pinus elliottii, divididas em duas classes diamétricas. Os resíduos, com exceção da serragem, coletados para análises, encontravam-se dispostos no pátio da empresa, na forma de cavacos. As seguintes propriedades físico-químicas dos cavacos foram analisadas: densidade básica, teor de extrativos solúvel em acetona, grupos acetilas, lignina solúvel e insolúvel em ácido (lignina Klason), grupos urônicos e carboidratos. Como principais resultados verificou-se um ligeiro aumento do rendimento em madeira serrada das madeiras de maiores diâmetros em relação às de menores diâmetros. Das análises físico-químicas foram obtidos os seguintes resultados: densidade básica de 0,402 g/cm³, teor de celulose de 37,42% e de 24,37% para hemiceluloses, lignina Klason de 26,75% e teor de extrativos de 3,80%. Concluiu-se, nesse estudo, que o baixo rendimento da serraria foi devido à falta de uma classificação diamétrica e diagramas de cortes apropriados para as toras, o que resulta em maior perda de madeira na forma de resíduos. Em relação às características química e física dos resíduos madeireiros, os resultados mostraram-se dentro dos padrões de qualidade da madeira utilizada para a produção de celulose kraft de fibra longa e, em algumas situações, apresentando vantagens em relação às madeiras mais jovens usualmente utilizadas pela indústria. Palavras-chave: Pinus elliottii; resíduos de serraria; celulose kraft. ABSTRACTThe forest-based industries have low yield and generate large amounts of waste, especially the primary processing industries, such as sawmills. In Brazil, initiatives are being created to combine the use of sawmill residues to pulp production. With this in mind, this study aimed to evaluate the performance of a
físico-químicas (viscosidade, ácidos hexenurônicos, etc.) e anatômicas (comprimento, largura, etc.)
<p>O objetivo deste estudo foi avaliar as propriedades de polpas kraft marrons de madeiras de<bold> Eucalyptus grandis</bold>e<bold> Eucalyptus urograndis</bold>de composição química distinta, principalmente em relação aos seus conteúdos de xilanas, para fabricação de papéis. As polpas marrons de número kappa 17-18 e conteúdos de xilanas variando de 6 a 21% foram produzidas sob diferentes protocolos de cozimento: 1) kraft convencional; 2) pré-hidrólise kraft; 3) kraft de alta alcalinidade; e 4) kraft de alto rendimento. As polpas marrons foram refinadas em moinho PFI e seus respectivos papéis produzidos foram avaliados quanto às suas propriedades físico-mecânicas e ópticas. De modo geral, as propriedades de resistência dos papéis foram beneficiadas pelo conteúdo de xilanas. Para níveis muito altos de refino, ocorreram quedas bruscas de resistência ao rasgo para os papéis e o consumo de energia de refino foi influenciado pelo conteúdo de xilanas nas polpas marrons. Os mais altos valores de volume específico aparente foram obtidos para os papéis com baixo conteúdo de xilanas, o que os torna interessantes, se branqueados, no segmento de papéis tissue. Os papéis com elevado conteúdo de xilanas apresentaram-se economicamente atrativos e com características de resistências adequadas para o segmento de papéis de imprimir e escrever.</p>
RESUMOHá variações nas composições químicas, físicas e na anatomia da madeira, entre espécies e também dentro da mesma espécie, as quais variam significativamente com a altura do tronco e na direção da medula até a casca. O objetivo do presente trabalho foi analisar a composição química da madeira de Cordia trichotoma. Foram analisadas três árvores, coletadas na Região Noroeste do Estado do Rio Grande do Sul, das quais foi retirado um disco de madeira localizado próximo da base. Quantificou-se o teor de cinzas e de extrativos pela norma TAPPI e o óleo essencial foi extraído usando o método por arraste de vapor. Também foram determinados os elementos químicos presentes nas amostras de madeira, na sua forma natural, e moída, por espectrometria de fluorescência de raios-X por energia dispersiva -EDXRF. A madeira de Cordia trichotoma apresentou teores médios de cinzas e de extrativos totais de 1,39% e 28,22%, respectivamente. Na composição química do óleo essencial foi possível a identificação de dois principais componentes do óleo o α-cadinol e do α-muurolol. Os elementos minerais mais abundantes foram o potássio, cálcio, magnésio, fósforo, enxofre e silício. O ferro foi o elemento com menor concentração encontrado na madeira pela técnica de análise utilizada. Palavras-chave: louro-pardo; química da madeira; óleos essenciais. ABSTRACTThere are variations in the chemical, physical and anatomy composition of wood, also among species and within species, which vary significantly with the height of the trunk and towards the bone to the shell. The objective of this study was to analyze the chemical composition of wood of Cordia trichotoma. Three tree samples were analyzed, collected in the northwest region of Rio Grande do Sul state, of which a wooden disc has been withdrawn located near the base. The ash and extractives by TAPPI were quantified and the essential oil was extracted using the method for drag steam. There were also certain chemical elements present in the wood samples, in its natural form, milled, and by spectrometry fluorescence X-ray energy dispersive -EDXRF. The wood of Cordia trichotoma showed average levels of ash and extractives of 1.39% and 28.22%, respectively. In the chemical composition of the essential oil, it was possible to identify two main oil components the α-cadinol and α-muurolol. The most abundant mineral elements were potassium, calcium, magnesium, phosphorus, sulfur and silicon. The iron was the element with lowest concentration found in the wood by the analysis technique used.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.